This is the latest recevied telemetry packets stored in our database for station/object IW2HUZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | Dg1h* | Eff1h* |
|---|---|---|---|---|---|
| 1786722388 | 1 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 91 Pcnt |
| 1786722088 | 2 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 84 Pcnt |
| 1786721788 | 2 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 84 Pcnt |
| 1786721488 | 0 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786721187 | 2 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786720887 | 3 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786720587 | 1 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786720286 | 2 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786719986 | 2 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786719686 | 0 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786719386 | 3 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786719085 | 4 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786718785 | 1 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 76 Pcnt |
| 1786718485 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 81 Pcnt |
| 1786718184 | 1 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 81 Pcnt |
| 1786717884 | 0 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 90 Pcnt |
| 1786717584 | 2 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 90 Pcnt |
| 1786717284 | 3 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 90 Pcnt |
| 1786716983 | 1 Pkt | 10 Pkt | 0 Pkt | 0 Pkt | 83 Pcnt |
| 1786716683 | 2 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 75 Pcnt |
| 1786716383 | 2 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 75 Pcnt |
| 1786716082 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 75 Pcnt |
| 1786715782 | 3 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 69 Pcnt |
| 1786715482 | 3 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 69 Pcnt |
| 1786715182 | 0 Pkt | 0 Pkt | 0 Pkt | 0 Pkt | 75 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)