APRS Track Direct

My position About ☰

reset

IR2ZZW-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2ZZW-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Rx1h*	Eff1h*	Dg1h*
1750190867	13.5 Volt	12 Pkt	60 Pkt	97 Pcnt	10 Pkt
1750190567	13.5 Volt	13 Pkt	60 Pkt	95 Pcnt	10 Pkt
1750190267	13.5 Volt	11 Pkt	60 Pkt	95 Pcnt	10 Pkt
1750189967	13.5 Volt	8 Pkt	60 Pkt	95 Pcnt	10 Pkt
1750189667	13.5 Volt	7 Pkt	60 Pkt	95 Pcnt	10 Pkt
1750189367	13.5 Volt	7 Pkt	60 Pkt	96 Pcnt	10 Pkt
1750189067	13.5 Volt	16 Pkt	70 Pkt	94 Pcnt	10 Pkt
1750188767	13.5 Volt	19 Pkt	60 Pkt	94 Pcnt	10 Pkt
1750188467	13.5 Volt	5 Pkt	60 Pkt	95 Pcnt	10 Pkt
1750188167	13.5 Volt	3 Pkt	60 Pkt	92 Pcnt	10 Pkt
1750187867	13.5 Volt	9 Pkt	60 Pkt	92 Pcnt	10 Pkt
1750187567	13.5 Volt	10 Pkt	60 Pkt	92 Pcnt	10 Pkt
1750187267	13.5 Volt	15 Pkt	60 Pkt	93 Pcnt	10 Pkt
1750186967	13.5 Volt	15 Pkt	60 Pkt	94 Pcnt	10 Pkt
1750186667	13.5 Volt	5 Pkt	50 Pkt	95 Pcnt	10 Pkt
1750186367	13.5 Volt	5 Pkt	60 Pkt	93 Pcnt	10 Pkt
1750186067	13.5 Volt	10 Pkt	60 Pkt	90 Pcnt	10 Pkt
1750185767	13.5 Volt	7 Pkt	60 Pkt	89 Pcnt	10 Pkt
1750185467	13.5 Volt	13 Pkt	60 Pkt	91 Pcnt	10 Pkt
1750185167	13.5 Volt	18 Pkt	60 Pkt	90 Pcnt	10 Pkt
1750184867	13.5 Volt	1 Pkt	50 Pkt	87 Pcnt	10 Pkt
1750184567	13.5 Volt	4 Pkt	70 Pkt	91 Pcnt	10 Pkt
1750184267	13.5 Volt	8 Pkt	70 Pkt	91 Pcnt	10 Pkt
1750183967	13.5 Volt	10 Pkt	70 Pkt	91 Pcnt	10 Pkt
1750183667	13.5 Volt	11 Pkt	70 Pkt	90 Pcnt	10 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)