APRS Track Direct

My position About ☰

reset

LU8EJA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU8EJA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1749328514	4 Pkt	22 Pkt	0 Pkt	-47 dBm	11.94 V
1749326689	1 Pkt	6 Pkt	0 Pkt	-48 dBm	11.94 V
1749324867	3 Pkt	4 Pkt	0 Pkt	-47 dBm	11.94 V
1749323043	1 Pkt	0 Pkt	0 Pkt	-47 dBm	11.94 V
1749321221	1 Pkt	0 Pkt	0 Pkt	-47 dBm	11.94 V
1749319399	0 Pkt	8 Pkt	0 Pkt	-48 dBm	11.94 V
1749317576	1 Pkt	0 Pkt	0 Pkt	-48 dBm	11.94 V
1749315754	1 Pkt	3 Pkt	0 Pkt	-49 dBm	11.94 V
1749313932	0 Pkt	11 Pkt	1 Pkt	-48 dBm	11.94 V
1749312109	2 Pkt	6 Pkt	0 Pkt	-48 dBm	11.94 V
1749310287	2 Pkt	7 Pkt	0 Pkt	-48 dBm	11.94 V
1749308464	3 Pkt	3 Pkt	0 Pkt	-49 dBm	11.94 V
1749306640	1 Pkt	5 Pkt	0 Pkt	-48 dBm	11.94 V
1749304818	0 Pkt	5 Pkt	0 Pkt	-47 dBm	11.94 V
1749302996	4 Pkt	4 Pkt	0 Pkt	-47 dBm	11.94 V
1749301173	7 Pkt	2 Pkt	0 Pkt	-48 dBm	11.94 V
1749299350	5 Pkt	2 Pkt	0 Pkt	-47 dBm	11.94 V
1749297527	3 Pkt	0 Pkt	0 Pkt	-48 dBm	11.94 V
1749295704	4 Pkt	0 Pkt	0 Pkt	-49 dBm	11.94 V
1749293880	3 Pkt	0 Pkt	0 Pkt	-47 dBm	11.94 V
1749292057	1 Pkt	0 Pkt	0 Pkt	-47 dBm	11.94 V
1749290235	3 Pkt	0 Pkt	0 Pkt	-48 dBm	11.94 V
1749288413	2 Pkt	3 Pkt	0 Pkt	-49 dBm	11.94 V
1749286590	3 Pkt	2 Pkt	0 Pkt	-48 dBm	11.94 V
1749284768	3 Pkt	3 Pkt	0 Pkt	-49 dBm	11.94 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)