This is the latest recevied telemetry packets stored in our database for station/object F1ZOC-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | U Alim* | I Alim* | Temp* | RX'ed* | Decod* |
---|---|---|---|---|---|
1754539566 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754539266 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754538966 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754538666 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754538365 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754538065 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754537765 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754537465 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754537164 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754536864 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754536564 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754536264 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754535963 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754535663 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754535363 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754535063 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754534762 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754534462 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754534162 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754533861 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754533561 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754533261 | 0 Volt | 0 mA | 21.5 °C | 0 | 100 % |
1754532961 | 0 Volt | 0 mA | 22 °C | 0 | 100 % |
1754532660 | 0 Volt | 0 mA | 22 °C | 0 | 100 % |
1754532360 | 0 Volt | 0 mA | 22 °C | 0 | 100 % |
*Used Equation Coefficients:
U Alim: 0, 0.1, 0
I Alim: 0, 19.5, 0
Temp: 0, 0.5, -64
RX'ed: 0, 1, 0
Decod: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)