APRS Track Direct

My position About ☰

reset

TA1NI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1NI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732471488	73 Pkt	9 Pkt	16 Pkt	-61 dBm	0.04 V
1732470758	61 Pkt	2 Pkt	11 Pkt	-61 dBm	0.04 V
1732470028	7 Pkt	0 Pkt	3 Pkt	-61 dBm	0.04 V
1732469499	86 Pkt	15 Pkt	22 Pkt	-61 dBm	0.04 V
1732468769	68 Pkt	15 Pkt	19 Pkt	-59 dBm	0.02 V
1732468039	93 Pkt	11 Pkt	17 Pkt	-60 dBm	0.04 V
1732467309	72 Pkt	12 Pkt	16 Pkt	-69 dBm	0.04 V
1732466581	92 Pkt	10 Pkt	10 Pkt	-64 dBm	0.02 V
1732465849	80 Pkt	9 Pkt	7 Pkt	-68 dBm	0.04 V
1732465121	71 Pkt	13 Pkt	7 Pkt	-68 dBm	0.04 V
1732464389	84 Pkt	14 Pkt	14 Pkt	-72 dBm	0.04 V
1732463659	76 Pkt	12 Pkt	14 Pkt	-66 dBm	0.04 V
1732462929	84 Pkt	14 Pkt	16 Pkt	-63 dBm	0.04 V
1732462202	88 Pkt	7 Pkt	14 Pkt	-67 dBm	0.04 V
1732461469	89 Pkt	12 Pkt	13 Pkt	-60 dBm	0.02 V
1732460739	91 Pkt	15 Pkt	13 Pkt	-68 dBm	0.02 V
1732460009	78 Pkt	11 Pkt	17 Pkt	-65 dBm	0.04 V
1732459279	94 Pkt	9 Pkt	15 Pkt	-64 dBm	0.04 V
1732458555	102 Pkt	5 Pkt	18 Pkt	-59 dBm	0.04 V
1732457819	98 Pkt	5 Pkt	9 Pkt	-62 dBm	0.04 V
1732457089	82 Pkt	8 Pkt	19 Pkt	-61 dBm	0.04 V
1732456360	96 Pkt	5 Pkt	23 Pkt	-62 dBm	0.04 V
1732455629	95 Pkt	13 Pkt	28 Pkt	-60 dBm	0.04 V
1732454901	97 Pkt	13 Pkt	25 Pkt	-58 dBm	0.04 V
1732454170	100 Pkt	5 Pkt	12 Pkt	-60 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)