This is the latest recevied telemetry packets stored in our database for station/object ER-IR6UAC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786728324 | 0 | 10 | 0 | 1 | 0 |
| 1786728024 | 0 | 60 | 0 | 2 | 0 |
| 1786727724 | 0 | 45 | 0 | 3 | 0 |
| 1786727424 | 0 | 0 | 0 | 0 | 0 |
| 1786727124 | 1 | 8 | 1 | 1 | 0 |
| 1786726824 | 1 | 52 | 1 | 2 | 0 |
| 1786726524 | 3 | 18 | 1 | 2 | 0 |
| 1786726224 | 15 | 66 | 2 | 5 | 0 |
| 1786725924 | 3 | 79 | 1 | 5 | 0 |
| 1786725624 | 0 | 52 | 0 | 2 | 0 |
| 1786725324 | 0 | 8 | 0 | 1 | 0 |
| 1786725024 | 0 | 17 | 0 | 2 | 0 |
| 1786724724 | 0 | 260 | 0 | 6 | 0 |
| 1786724424 | 0 | 77 | 0 | 3 | 0 |
| 1786724124 | 0 | 0 | 0 | 0 | 0 |
| 1786723824 | 0 | 0 | 0 | 0 | 0 |
| 1786723524 | 0 | 0 | 0 | 0 | 0 |
| 1786723224 | 0 | 44 | 0 | 1 | 0 |
| 1786722924 | 0 | 0 | 0 | 0 | 0 |
| 1786722624 | 0 | 0 | 0 | 0 | 0 |
| 1786722324 | 0 | 0 | 0 | 0 | 0 |
| 1786722024 | 0 | 44 | 0 | 1 | 0 |
| 1786721724 | 0 | 0 | 0 | 0 | 0 |
| 1786721424 | 0 | 0 | 0 | 0 | 0 |
| 1786721124 | 0 | 116 | 0 | 5 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)