APRS Track Direct

My position About ☰

reset

VK2LJ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2LJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732306176	13.95 Volt	270 Pkt	30 Pkt	98 Pcnt
1732305456	13.95 Volt	300 Pkt	30 Pkt	99 Pcnt
1732305339	13.88 Volt	300 Pkt	30 Pkt	99 Pcnt
1732304736	13.95 Volt	320 Pkt	30 Pkt	99 Pcnt
1732304016	13.95 Volt	340 Pkt	30 Pkt	99 Pcnt
1732302576	13.95 Volt	370 Pkt	30 Pkt	99 Pcnt
1732301857	13.95 Volt	360 Pkt	30 Pkt	99 Pcnt
1732301617	13.95 Volt	370 Pkt	30 Pkt	99 Pcnt
1732301137	13.95 Volt	370 Pkt	30 Pkt	99 Pcnt
1732300417	13.88 Volt	370 Pkt	30 Pkt	99 Pcnt
1732299697	13.95 Volt	330 Pkt	30 Pkt	99 Pcnt
1732298977	13.95 Volt	340 Pkt	30 Pkt	99 Pcnt
1732298257	13.95 Volt	320 Pkt	30 Pkt	98 Pcnt
1732297897	13.95 Volt	310 Pkt	30 Pkt	98 Pcnt
1732297537	13.95 Volt	300 Pkt	30 Pkt	98 Pcnt
1732296817	13.95 Volt	270 Pkt	30 Pkt	98 Pcnt
1732296097	13.88 Volt	260 Pkt	30 Pkt	98 Pcnt
1732295377	13.95 Volt	270 Pkt	30 Pkt	98 Pcnt
1732294657	13.88 Volt	280 Pkt	40 Pkt	98 Pcnt
1732294177	13.65 Volt	310 Pkt	40 Pkt	99 Pcnt
1732293937	13.88 Volt	310 Pkt	40 Pkt	98 Pcnt
1732293217	13.95 Volt	320 Pkt	30 Pkt	98 Pcnt
1732292497	13.95 Volt	300 Pkt	40 Pkt	98 Pcnt
1732291777	13.88 Volt	290 Pkt	30 Pkt	98 Pcnt
1732291057	13.88 Volt	290 Pkt	30 Pkt	98 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)