APRS Track Direct

My position About ☰

reset

SR5E Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5E. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	CPU Temp*	CPU Usage*	Temp DS1*	Temp DS2*
1745039403	50 Deg.C	2 %	28.5 Deg.C	28.5 Deg.C
1745038806	51 Deg.C	2 %	28.3 Deg.C	28.3 Deg.C
1745038203	53 Deg.C	2 %	28.3 Deg.C	28.3 Deg.C
1745037603	52 Deg.C	2 %	28.3 Deg.C	28.3 Deg.C
1745037006	54 Deg.C	2 %	28.5 Deg.C	28.5 Deg.C
1745036403	52 Deg.C	2 %	28.7 Deg.C	28.7 Deg.C
1745035806	53 Deg.C	2 %	28.8 Deg.C	28.8 Deg.C
1745035203	52 Deg.C	2 %	28.6 Deg.C	28.6 Deg.C
1745034606	53 Deg.C	2 %	28.8 Deg.C	28.8 Deg.C
1745034003	53 Deg.C	2 %	28.7 Deg.C	28.7 Deg.C
1745033403	53 Deg.C	2 %	28.7 Deg.C	28.7 Deg.C
1745032806	54 Deg.C	2 %	29 Deg.C	29 Deg.C
1745032203	53 Deg.C	2 %	28.9 Deg.C	28.9 Deg.C
1745031606	53 Deg.C	2 %	28.6 Deg.C	28.6 Deg.C
1745031003	53 Deg.C	2 %	28.6 Deg.C	28.6 Deg.C
1745030406	54 Deg.C	2 %	28.8 Deg.C	28.8 Deg.C
1745029803	52 Deg.C	2 %	28.9 Deg.C	28.9 Deg.C
1745029203	53 Deg.C	2 %	29 Deg.C	29 Deg.C
1745028607	53 Deg.C	2 %	29.1 Deg.C	29.1 Deg.C
1745028003	53 Deg.C	2 %	28.9 Deg.C	28.9 Deg.C
1745027406	52 Deg.C	2 %	28.9 Deg.C	28.9 Deg.C
1745026803	53 Deg.C	2 %	29 Deg.C	29 Deg.C

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

CPU Usage: 0, 1, 0

Temp DS1: 0, 0.1, 0

Temp DS2: 0, 0.1, 0

Value5: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)