APRS Track Direct

My position About ☰

reset

YM4KIS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KIS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1782666342	12.58 Volt	120 Pkt	20 Pkt	91 Pcnt	86 Pcnt
1782665682	12.58 Volt	120 Pkt	20 Pkt	93 Pcnt	86 Pcnt
1782665021	12.65 Volt	130 Pkt	20 Pkt	92 Pcnt	86 Pcnt
1782664360	12.65 Volt	130 Pkt	20 Pkt	92 Pcnt	86 Pcnt
1782663700	12.65 Volt	140 Pkt	20 Pkt	92 Pcnt	86 Pcnt
1782663039	12.65 Volt	150 Pkt	30 Pkt	91 Pcnt	86 Pcnt
1782662378	12.65 Volt	200 Pkt	40 Pkt	86 Pcnt	86 Pcnt
1782661718	12.58 Volt	270 Pkt	70 Pkt	87 Pcnt	86 Pcnt
1782661057	12.36 Volt	310 Pkt	80 Pkt	86 Pcnt	86 Pcnt
1782660397	12.65 Volt	310 Pkt	90 Pkt	86 Pcnt	85 Pcnt
1782659736	12.95 Volt	320 Pkt	90 Pkt	86 Pcnt	85 Pcnt
1782659075	13.39 Volt	280 Pkt	70 Pkt	87 Pcnt	86 Pcnt
1782658415	13.32 Volt	210 Pkt	50 Pkt	88 Pcnt	86 Pcnt
1782657754	13.25 Volt	260 Pkt	70 Pkt	84 Pcnt	85 Pcnt
1782657093	13.17 Volt	300 Pkt	80 Pkt	83 Pcnt	86 Pcnt
1782656433	13.1 Volt	380 Pkt	100 Pkt	80 Pcnt	85 Pcnt
1782655772	13.25 Volt	450 Pkt	130 Pkt	80 Pcnt	85 Pcnt
1782655111	13.02 Volt	470 Pkt	140 Pkt	79 Pcnt	85 Pcnt
1782654451	13.54 Volt	430 Pkt	120 Pkt	78 Pcnt	85 Pcnt
1782653791	13.32 Volt	330 Pkt	90 Pkt	79 Pcnt	86 Pcnt
1782653131	13.32 Volt	270 Pkt	70 Pkt	80 Pcnt	88 Pcnt
1782652469	13.25 Volt	200 Pkt	50 Pkt	83 Pcnt	90 Pcnt
1782651808	13.69 Volt	140 Pkt	30 Pkt	85 Pcnt	92 Pcnt
1782651148	13.69 Volt	120 Pkt	20 Pkt	91 Pcnt	94 Pcnt
1782650487	13.69 Volt	120 Pkt	20 Pkt	93 Pcnt	94 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)