APRS Track Direct

My position About ☰

reset

WC4PEM-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1732425001	24.5 C	14.33 Volt	250 Pkt	680 Pkt	51 Pcnt
1732425000	24.5 C	14.33 Volt	250 Pkt	680 Pkt	51 Pcnt
1732424701	25.5 C	14.33 Volt	250 Pkt	680 Pkt	53 Pcnt
1732424401	25 C	14.33 Volt	240 Pkt	690 Pkt	55 Pcnt
1732424401	25 C	14.33 Volt	240 Pkt	690 Pkt	55 Pcnt
1732424100	24.5 C	14.33 Volt	250 Pkt	710 Pkt	56 Pcnt
1732423801	26 C	14.33 Volt	250 Pkt	720 Pkt	58 Pcnt
1732423800	26 C	14.33 Volt	250 Pkt	720 Pkt	58 Pcnt
1732423501	25 C	14.33 Volt	250 Pkt	730 Pkt	59 Pcnt
1732423201	25 C	14.33 Volt	250 Pkt	750 Pkt	61 Pcnt
1732423201	25 C	14.33 Volt	250 Pkt	750 Pkt	61 Pcnt
1732422901	26 C	14.33 Volt	260 Pkt	780 Pkt	63 Pcnt
1732422601	24.5 C	14.33 Volt	260 Pkt	790 Pkt	66 Pcnt
1732422601	24.5 C	14.33 Volt	260 Pkt	790 Pkt	66 Pcnt
1732422301	25.5 C	14.33 Volt	260 Pkt	810 Pkt	68 Pcnt
1732422001	25.5 C	14.33 Volt	270 Pkt	840 Pkt	70 Pcnt
1732422001	25.5 C	14.33 Volt	270 Pkt	840 Pkt	70 Pcnt
1732421701	24.5 C	14.33 Volt	270 Pkt	860 Pkt	70 Pcnt
1732421401	26 C	14.33 Volt	280 Pkt	870 Pkt	70 Pcnt
1732421401	26 C	14.33 Volt	280 Pkt	870 Pkt	70 Pcnt
1732421101	25.5 C	14.33 Volt	270 Pkt	870 Pkt	69 Pcnt
1732420801	24.5 C	14.33 Volt	270 Pkt	890 Pkt	69 Pcnt
1732420801	24.5 C	14.33 Volt	270 Pkt	890 Pkt	69 Pcnt
1732420501	26 C	14.33 Volt	270 Pkt	880 Pkt	70 Pcnt
1732420201	25 C	14.33 Volt	270 Pkt	870 Pkt	69 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)