This is the latest recevied telemetry packets stored in our database for station/object OK1LOL-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719660548 | 3 | 3 | 16 | 19 | 53.33 |
1719659647 | 3 | 3 | 16 | 18 | 53.33 |
1719658746 | 3 | 3 | 16 | 17 | 53.33 |
1719657845 | 3 | 3 | 16 | 16 | 53.33 |
1719656944 | 3 | 3 | 16 | 15 | 53.33 |
1719656043 | 3 | 3 | 16 | 14 | 53.33 |
1719655142 | 3 | 3 | 16 | 13 | 53.33 |
1719654241 | 3 | 3 | 16 | 12 | 53.33 |
1719653340 | 3 | 3 | 16 | 11 | 53.33 |
1719652438 | 4 | 4 | 16 | 10 | 53.33 |
1719651537 | 3 | 3 | 16 | 9 | 42.78 |
1719650636 | 3 | 3 | 16 | 8 | 53.33 |
1719649735 | 3 | 3 | 16 | 7 | 53.33 |
1719648834 | 3 | 3 | 16 | 6 | 53.33 |
1719647933 | 3 | 3 | 16 | 5 | 53.33 |
1719647032 | 3 | 3 | 16 | 4 | 53.33 |
1719646131 | 3 | 3 | 16 | 3 | 53.33 |
1719645230 | 3 | 3 | 16 | 2 | 53.33 |
1719644329 | 3 | 3 | 16 | 1 | 53.33 |
1719643428 | 3 | 3 | 16 | 0 | 53.33 |
1719642527 | 3 | 3 | 16 | 95 | 53.33 |
1719641627 | 3 | 3 | 16 | 94 | 53.33 |
1719640725 | 3 | 3 | 16 | 93 | 53.33 |
1719639824 | 3 | 3 | 16 | 92 | 53.33 |
1719638923 | 3 | 3 | 16 | 91 | 53.33 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)