APRS Track Direct

My position About ☰

reset

OE8XDR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE8XDR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1836274796	13.5 Volt	270 Pkt	37 Pcnt	22.5 C
1836274496	13.5 Volt	260 Pkt	36 Pcnt	23 C
1836274346	13.5 Volt	280 Pkt	38 Pcnt	22.5 C
1836274196	13.5 Volt	260 Pkt	36 Pcnt	23 C
1836273896	13.5 Volt	270 Pkt	37 Pcnt	23 C
1762337419	14.48 Volt	290 Pkt	36 Pcnt	25.5 C
1762337119	14.63 Volt	290 Pkt	37 Pcnt	25.5 C
1762336819	14.55 Volt	290 Pkt	36 Pcnt	26 C
1762336519	14.55 Volt	290 Pkt	36 Pcnt	26 C
1762336219	14.7 Volt	290 Pkt	36 Pcnt	26 C
1762335919	14.63 Volt	280 Pkt	35 Pcnt	26.5 C
1762335619	14.55 Volt	280 Pkt	34 Pcnt	26 C
1762335320	14.48 Volt	270 Pkt	33 Pcnt	26 C
1762335019	14.55 Volt	280 Pkt	32 Pcnt	26.5 C
1762334719	14.63 Volt	270 Pkt	31 Pcnt	26.5 C
1762334420	14.48 Volt	270 Pkt	30 Pcnt	26.5 C
1762334119	14.48 Volt	270 Pkt	30 Pcnt	26.5 C
1762333819	14.33 Volt	260 Pkt	29 Pcnt	26.5 C
1762333520	14.48 Volt	250 Pkt	28 Pcnt	26.5 C
1762333220	14.55 Volt	240 Pkt	26 Pcnt	26.5 C
1762333219	14.55 Volt	240 Pkt	26 Pcnt	26.5 C
1762332919	14.48 Volt	230 Pkt	26 Pcnt	27 C
1762332620	14.48 Volt	230 Pkt	25 Pcnt	26.5 C
1762332319	14.48 Volt	220 Pkt	25 Pcnt	26.5 C
1762332020	14.48 Volt	200 Pkt	23 Pcnt	26 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)