This is the latest recevied telemetry packets stored in our database for station/object SR9WXY-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10min* | Tx10min* | Digi10min* | HostTx10m* | Tempre* |
|---|---|---|---|---|---|
| 1791757081 | 65 Pkt | 9 Pkt | 3 Pkt | 0 Pkt | 24 DegC |
| 1791755872 | 57 Pkt | 5 Pkt | 3 Pkt | 0 Pkt | 24 DegC |
| 1791755272 | 61 Pkt | 6 Pkt | 3 Pkt | 0 Pkt | 24 DegC |
| 1791753470 | 68 Pkt | 6 Pkt | 3 Pkt | 0 Pkt | 24 DegC |
| 1791751667 | 82 Pkt | 6 Pkt | 4 Pkt | 0 Pkt | 24.5 DegC |
| 1791718002 | 75 Pkt | 4 Pkt | 1 Pkt | 0 Pkt | 25 DegC |
| 1791711988 | 92 Pkt | 6 Pkt | 4 Pkt | 0 Pkt | 25 DegC |
| 1791711388 | 120 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 25 DegC |
| 1791710786 | 114 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 25 DegC |
| 1791709582 | 103 Pkt | 5 Pkt | 2 Pkt | 0 Pkt | 25 DegC |
| 1791708382 | 75 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 25 DegC |
| 1791707182 | 116 Pkt | 9 Pkt | 3 Pkt | 0 Pkt | 25 DegC |
| 1791706573 | 81 Pkt | 3 Pkt | 0 Pkt | 0 Pkt | 25 DegC |
| 1791705973 | 82 Pkt | 6 Pkt | 4 Pkt | 0 Pkt | 25 DegC |
| 1791705373 | 85 Pkt | 6 Pkt | 3 Pkt | 0 Pkt | 25 DegC |
| 1791704773 | 82 Pkt | 6 Pkt | 3 Pkt | 0 Pkt | 25 DegC |
| 1791704170 | 69 Pkt | 3 Pkt | 1 Pkt | 0 Pkt | 25 DegC |
| 1791703571 | 82 Pkt | 9 Pkt | 6 Pkt | 0 Pkt | 25 DegC |
| 1791702969 | 91 Pkt | 7 Pkt | 5 Pkt | 0 Pkt | 25 DegC |
| 1791702369 | 77 Pkt | 4 Pkt | 0 Pkt | 0 Pkt | 25 DegC |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
HostTx10m: 0, 1, 0
Tempre: 0, 0.5, -50
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)