APRS Track Direct

My position About ☰

reset

9W2VGA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2VGA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732288619	10 Pkt	17 Pkt	-62 dBm	4.8 V
1732286794	13 Pkt	18 Pkt	-64 dBm	4.8 V
1732284967	40 Pkt	9 Pkt	-66 dBm	4.82 V
1732283139	0 Pkt	0 Pkt	-67 dBm	4.8 V
1732281447	33 Pkt	10 Pkt	-64 dBm	4.8 V
1732279621	1 Pkt	0 Pkt	-65 dBm	4.8 V
1732277795	1 Pkt	0 Pkt	-62 dBm	4.82 V
1732275970	2 Pkt	0 Pkt	-68 dBm	4.82 V
1732274145	2 Pkt	0 Pkt	-64 dBm	4.8 V
1732272320	1 Pkt	1 Pkt	-68 dBm	4.82 V
1732270495	0 Pkt	0 Pkt	-65 dBm	4.8 V
1732270058	42 Pkt	6 Pkt	-67 dBm	4.82 V
1732268231	0 Pkt	0 Pkt	-69 dBm	4.82 V
1732267064	21 Pkt	2 Pkt	-67 dBm	4.8 V
1732263663	2 Pkt	0 Pkt	-68 dBm	4.8 V
1732263105	28 Pkt	6 Pkt	-66 dBm	4.8 V
1732261278	4 Pkt	0 Pkt	-65 dBm	4.8 V
1732260328	48 Pkt	23 Pkt	-64 dBm	4.82 V
1732258500	37 Pkt	8 Pkt	-70 dBm	4.8 V
1732256674	1 Pkt	3 Pkt	-71 dBm	4.82 V
1732254849	1 Pkt	7 Pkt	-71 dBm	4.8 V
1732253023	35 Pkt	4 Pkt	-72 dBm	4.82 V
1732251197	60 Pkt	6 Pkt	-72 dBm	4.84 V
1732249371	56 Pkt	8 Pkt	-72 dBm	4.82 V
1732247545	9 Pkt	7 Pkt	-71 dBm	4.8 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)