APRS Track Direct

My position About ☰

reset

HP3EGD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP3EGD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Eff*
1744726849	13.83 Volt	30 Pkt	85 Pcnt	72 Pcnt
1744726249	13.83 Volt	30 Pkt	81 Pcnt	72 Pcnt
1744725649	13.83 Volt	40 Pkt	78 Pcnt	72 Pcnt
1744725049	13.83 Volt	40 Pkt	74 Pcnt	72 Pcnt
1744724449	13.83 Volt	50 Pkt	76 Pcnt	72 Pcnt
1744723849	13.83 Volt	50 Pkt	77 Pcnt	72 Pcnt
1744723249	13.83 Volt	50 Pkt	76 Pcnt	72 Pcnt
1744722649	13.83 Volt	50 Pkt	76 Pcnt	72 Pcnt
1744722049	13.83 Volt	40 Pkt	78 Pcnt	72 Pcnt
1744721449	13.83 Volt	30 Pkt	83 Pcnt	72 Pcnt
1744720849	13.83 Volt	30 Pkt	83 Pcnt	72 Pcnt
1744720249	13.83 Volt	20 Pkt	86 Pcnt	72 Pcnt
1744719649	13.83 Volt	20 Pkt	74 Pcnt	72 Pcnt
1744719049	13.83 Volt	20 Pkt	78 Pcnt	72 Pcnt
1744718449	13.83 Volt	20 Pkt	78 Pcnt	72 Pcnt
1744717849	13.83 Volt	20 Pkt	71 Pcnt	72 Pcnt
1744717249	13.83 Volt	10 Pkt	72 Pcnt	72 Pcnt
1744716649	13.83 Volt	10 Pkt	70 Pcnt	72 Pcnt
1744716049	13.83 Volt	10 Pkt	87 Pcnt	72 Pcnt
1744715449	13.83 Volt	0 Pkt	80 Pcnt	72 Pcnt
1744714849	13.83 Volt	0 Pkt	85 Pcnt	72 Pcnt
1744714249	13.83 Volt	0 Pkt	100 Pcnt	72 Pcnt
1744713649	13.83 Volt	0 Pkt	100 Pcnt	72 Pcnt
1744713049	13.83 Volt	0 Pkt	100 Pcnt	72 Pcnt
1744712449	13.83 Volt	0 Pkt	100 Pcnt	72 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)