APRS Track Direct

My position About ☰

reset

BX6AED-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX6AED-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	FWD_APRS_10M*	POS_PKTS_10M*	MSG_PKTS_10M*	CTRL_PKTS_10M*
1786787838	66 cnt	0 cnt	41 cnt	1 cnt	24 cnt
1786787238	63 cnt	0 cnt	47 cnt	1 cnt	15 cnt
1786786639	65 cnt	0 cnt	45 cnt	0 cnt	20 cnt
1786786038	55 cnt	0 cnt	38 cnt	1 cnt	16 cnt
1786785439	57 cnt	0 cnt	39 cnt	0 cnt	18 cnt
1786784838	51 cnt	0 cnt	38 cnt	0 cnt	13 cnt
1786784238	62 cnt	0 cnt	39 cnt	0 cnt	23 cnt
1786783639	61 cnt	0 cnt	38 cnt	1 cnt	22 cnt
1786783038	62 cnt	0 cnt	45 cnt	2 cnt	15 cnt
1786782438	61 cnt	0 cnt	41 cnt	0 cnt	20 cnt
1786781838	65 cnt	0 cnt	40 cnt	9 cnt	16 cnt
1786781238	59 cnt	0 cnt	37 cnt	5 cnt	17 cnt
1786780638	68 cnt	1 cnt	45 cnt	6 cnt	17 cnt
1786780038	57 cnt	0 cnt	37 cnt	2 cnt	18 cnt
1786779438	61 cnt	0 cnt	37 cnt	2 cnt	22 cnt
1786778839	65 cnt	0 cnt	46 cnt	1 cnt	18 cnt
1786778238	65 cnt	0 cnt	46 cnt	0 cnt	19 cnt
1786777638	70 cnt	0 cnt	51 cnt	0 cnt	19 cnt
1786777038	64 cnt	0 cnt	46 cnt	0 cnt	18 cnt
1786776438	68 cnt	0 cnt	39 cnt	6 cnt	23 cnt
1786775838	76 cnt	0 cnt	48 cnt	6 cnt	22 cnt
1786775243	58 cnt	0 cnt	34 cnt	9 cnt	15 cnt
1786774638	49 cnt	0 cnt	36 cnt	0 cnt	13 cnt
1786774038	59 cnt	0 cnt	44 cnt	0 cnt	15 cnt
1786773438	58 cnt	0 cnt	39 cnt	0 cnt	19 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)