This is the latest recevied telemetry packets stored in our database for station/object BH2WAV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU-Used* | CPU-Temp* | MEM-Used* | UpSpeed* | DownSpeed* |
|---|---|---|---|---|---|
| 1744797004 | 31.34 % | 38 C | 25 % | 0.08 KBps | 0.49 KBps |
| 1744796102 | 7.5 % | 37 C | 25 % | 0 KBps | 0.03 KBps |
| 1744795205 | 35.09 % | 38 C | 25 % | 0.69 KBps | 0.14 KBps |
| 1744794302 | 33.58 % | 37 C | 25 % | 0.06 KBps | 0.06 KBps |
| 1744793402 | 36.75 % | 37 C | 25 % | 0.19 KBps | 0.16 KBps |
| 1744792502 | 12.44 % | 37 C | 25 % | 11.21 KBps | 165.65 KBps |
| 1744791602 | 36.5 % | 37 C | 25 % | 1.2 KBps | 0.03 KBps |
| 1744790702 | 5 % | 38 C | 25 % | 0.03 KBps | 0.03 KBps |
| 1744789805 | 24.63 % | 37 C | 25 % | 0.17 KBps | 0.23 KBps |
| 1744788905 | 28.36 % | 37 C | 25 % | 0.07 KBps | 0.08 KBps |
| 1744788002 | 34.75 % | 37 C | 26 % | 1.12 KBps | 0.09 KBps |
| 1744787105 | 2.26 % | 35 C | 26 % | 0.05 KBps | 0.06 KBps |
| 1744786204 | 1.5 % | 35 C | 26 % | 0.75 KBps | 0 KBps |
| 1744785305 | 0.5 % | 35 C | 26 % | 0.04 KBps | 0 KBps |
| 1744784405 | 48.13 % | 35 C | 26 % | 0.03 KBps | 0.03 KBps |
| 1744783503 | 34.16 % | 35 C | 26 % | 0.04 KBps | 0.06 KBps |
| 1744782602 | 33.25 % | 35 C | 26 % | 0 KBps | 0 KBps |
| 1744781702 | 9.65 % | 33 C | 26 % | 0.13 KBps | 0.11 KBps |
| 1744780802 | 6.98 % | 33 C | 26 % | 1.05 KBps | 0.11 KBps |
| 1744779903 | 0.5 % | 33 C | 26 % | 0.16 KBps | 0.13 KBps |
| 1744779002 | 1 % | 35 C | 26 % | 0.13 KBps | 0.11 KBps |
| 1744778102 | 34.5 % | 34 C | 26 % | 0.03 KBps | 0.03 KBps |
| 1744777203 | 42.39 % | 34 C | 26 % | 0 KBps | 0 KBps |
| 1744776304 | 31.76 % | 34 C | 26 % | 0.1 KBps | 0.08 KBps |
| 1744775402 | 15.5 % | 33 C | 26 % | 0.06 KBps | 0.03 KBps |
*Used Equation Coefficients:
CPU-Used: 0, 1, 0
CPU-Temp: 0, 1, 0
MEM-Used: 0, 1, 0
UpSpeed: 0, 1, 0
DownSpeed: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)