This is the latest recevied telemetry packets stored in our database for station/object SR9WXP-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10min* | Visc10min* | Digi10min* | Vbatt* | Tempre* |
|---|---|---|---|---|---|
| 1791758780 | 24 Pkt | 0 Pkt | 0 Pkt | 13.38 V | 7.5 DegC |
| 1791755179 | 52 Pkt | 1 Pkt | 1 Pkt | 13.22 V | 6.5 DegC |
| 1791754579 | 27 Pkt | 0 Pkt | 0 Pkt | 13.16 V | 5 DegC |
| 1791731198 | 156 Pkt | 5 Pkt | 7 Pkt | 12.4 V | 8 DegC |
| 1791712565 | 163 Pkt | 3 Pkt | 6 Pkt | 12.54 V | 8.5 DegC |
| 1791711979 | 178 Pkt | 9 Pkt | 4 Pkt | 12.56 V | 8.5 DegC |
| 1791710765 | 157 Pkt | 2 Pkt | 8 Pkt | 12.54 V | 8 DegC |
| 1791708363 | 151 Pkt | 5 Pkt | 5 Pkt | 12.6 V | 7.5 DegC |
| 1791706559 | 146 Pkt | 5 Pkt | 9 Pkt | 12.6 V | 7.5 DegC |
| 1791705947 | 144 Pkt | 5 Pkt | 5 Pkt | 12.62 V | 7.5 DegC |
| 1791705346 | 152 Pkt | 1 Pkt | 8 Pkt | 12.62 V | 7 DegC |
| 1791704746 | 137 Pkt | 1 Pkt | 9 Pkt | 12.64 V | 7.5 DegC |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Visc10min: 0, 1, 0
Digi10min: 0, 1, 0
Vbatt: 0, 0.02, 10
Tempre: 0, 0.5, -50
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)