This is the latest recevied telemetry packets stored in our database for station/object N1DTA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1745066738 | 13.65 Volt | 1030 Pkt | 310 Pkt | 62 Pcnt | 0 None |
| 1745066735 | 13.65 Volt | 1030 Pkt | 310 Pkt | 62 Pcnt | 0 None |
| 1745066435 | 13.65 Volt | 1030 Pkt | 300 Pkt | 63 Pcnt | 0 None |
| 1745066145 | 14.1 Volt | 1020 Pkt | 300 Pkt | 62 Pcnt | 0 None |
| 1745066135 | 14.1 Volt | 1020 Pkt | 300 Pkt | 62 Pcnt | 0 None |
| 1745065835 | 13.8 Volt | 1030 Pkt | 290 Pkt | 62 Pcnt | 0 None |
| 1745065536 | 13.73 Volt | 1060 Pkt | 290 Pkt | 63 Pcnt | 0 None |
| 1745065535 | 13.73 Volt | 1060 Pkt | 290 Pkt | 63 Pcnt | 0 None |
| 1745065235 | 13.65 Volt | 1060 Pkt | 290 Pkt | 63 Pcnt | 0 None |
| 1745064940 | 13.88 Volt | 1060 Pkt | 280 Pkt | 64 Pcnt | 0 None |
| 1745064935 | 13.88 Volt | 1060 Pkt | 280 Pkt | 64 Pcnt | 0 None |
| 1745064635 | 13.73 Volt | 1050 Pkt | 280 Pkt | 64 Pcnt | 0 None |
| 1745064337 | 13.88 Volt | 1070 Pkt | 290 Pkt | 65 Pcnt | 0 None |
| 1745064335 | 13.88 Volt | 1070 Pkt | 290 Pkt | 65 Pcnt | 0 None |
| 1745064035 | 13.8 Volt | 1060 Pkt | 280 Pkt | 65 Pcnt | 0 None |
| 1745063740 | 13.88 Volt | 1050 Pkt | 280 Pkt | 65 Pcnt | 0 None |
| 1745063735 | 13.88 Volt | 1050 Pkt | 280 Pkt | 65 Pcnt | 0 None |
| 1745063435 | 13.58 Volt | 1040 Pkt | 280 Pkt | 66 Pcnt | 0 None |
| 1745063138 | 13.65 Volt | 1040 Pkt | 280 Pkt | 65 Pcnt | 0 None |
| 1745063135 | 13.65 Volt | 1040 Pkt | 280 Pkt | 65 Pcnt | 0 None |
| 1745062835 | 14.03 Volt | 1040 Pkt | 280 Pkt | 66 Pcnt | 0 None |
| 1745062542 | 13.88 Volt | 1050 Pkt | 280 Pkt | 66 Pcnt | 0 None |
| 1745062535 | 13.88 Volt | 1050 Pkt | 280 Pkt | 66 Pcnt | 0 None |
| 1745062235 | 14.1 Volt | 1060 Pkt | 280 Pkt | 68 Pcnt | 0 None |
| 1745061938 | 13.73 Volt | 1070 Pkt | 280 Pkt | 69 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)