This is the latest recevied telemetry packets stored in our database for station/object SQ9P-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732290085 | 87 | 124 | 100 | 4 | 224 |
| 1732289161 | 197 | 123 | 100 | 4 | 225 |
| 1732288236 | 175 | 123 | 100 | 3 | 222 |
| 1732287312 | 255 | 123 | 100 | 4 | 224 |
| 1732286387 | 247 | 124 | 100 | 4 | 224 |
| 1732285463 | 255 | 124 | 100 | 4 | 224 |
| 1732284539 | 202 | 124 | 100 | 4 | 224 |
| 1732283614 | 255 | 124 | 100 | 4 | 224 |
| 1732282689 | 191 | 124 | 100 | 4 | 225 |
| 1732281765 | 215 | 124 | 100 | 4 | 225 |
| 1732280840 | 234 | 124 | 100 | 4 | 225 |
| 1732279916 | 220 | 124 | 100 | 4 | 223 |
| 1732278991 | 178 | 124 | 100 | 3 | 224 |
| 1732278067 | 106 | 124 | 100 | 4 | 225 |
| 1732277143 | 255 | 124 | 100 | 3 | 223 |
| 1732276219 | 143 | 125 | 100 | 3 | 221 |
| 1732275305 | 154 | 124 | 100 | 3 | 224 |
| 1732274370 | 86 | 124 | 100 | 3 | 225 |
| 1732273446 | 153 | 124 | 100 | 3 | 225 |
| 1732272522 | 225 | 124 | 100 | 3 | 224 |
| 1732271598 | 255 | 124 | 100 | 3 | 224 |
| 1732270673 | 251 | 125 | 100 | 3 | 220 |
| 1732269749 | 121 | 125 | 100 | 3 | 221 |
| 1732268824 | 203 | 125 | 100 | 3 | 224 |
| 1732267900 | 238 | 125 | 100 | 3 | 224 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)