APRS Track Direct

My position About ☰

reset

9W2VGA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2VGA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732227465	2 Pkt	16 Pkt	-68 dBm	4.84 V
1732223821	3 Pkt	15 Pkt	-68 dBm	4.86 V
1732221988	3 Pkt	15 Pkt	-68 dBm	4.86 V
1732220162	3 Pkt	19 Pkt	-69 dBm	4.84 V
1732218336	3 Pkt	19 Pkt	-67 dBm	4.84 V
1732216509	4 Pkt	20 Pkt	-67 dBm	4.86 V
1732214683	2 Pkt	21 Pkt	-67 dBm	4.86 V
1732212857	2 Pkt	26 Pkt	-70 dBm	4.84 V
1732211031	2 Pkt	21 Pkt	-66 dBm	4.84 V
1732209205	5 Pkt	23 Pkt	-70 dBm	4.86 V
1732207379	4 Pkt	20 Pkt	-71 dBm	4.86 V
1732205553	4 Pkt	14 Pkt	-70 dBm	4.86 V
1732203726	6 Pkt	17 Pkt	-71 dBm	4.86 V
1732201900	2 Pkt	23 Pkt	-71 dBm	4.84 V
1732200073	3 Pkt	28 Pkt	-72 dBm	4.84 V
1732198245	1 Pkt	1 Pkt	-68 dBm	4.86 V
1732197713	45 Pkt	48 Pkt	-70 dBm	4.84 V
1732195884	42 Pkt	40 Pkt	-73 dBm	4.84 V
1732194055	66 Pkt	48 Pkt	-71 dBm	4.86 V
1732192225	43 Pkt	41 Pkt	-70 dBm	4.84 V
1732190397	34 Pkt	44 Pkt	-69 dBm	4.84 V
1732188569	51 Pkt	40 Pkt	-68 dBm	4.86 V
1732186740	64 Pkt	29 Pkt	-72 dBm	4.86 V
1732184911	52 Pkt	39 Pkt	-69 dBm	4.86 V
1732183080	16 Pkt	18 Pkt	-71 dBm	4.86 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)