APRS Track Direct

My position About ☰

reset

HS5NMF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5NMF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732427806	2 Pkt	0 Pkt	-31 dBm	13.8 V
1732427482	0 Pkt	0 Pkt	-30 dBm	13.8 V
1732427158	0 Pkt	0 Pkt	-30 dBm	13.8 V
1732426835	1 Pkt	0 Pkt	-29 dBm	13.82 V
1732426511	0 Pkt	0 Pkt	-30 dBm	13.8 V
1732426187	0 Pkt	0 Pkt	-29 dBm	13.82 V
1732425863	1 Pkt	0 Pkt	-30 dBm	13.8 V
1732425540	0 Pkt	0 Pkt	-29 dBm	13.82 V
1732425216	2 Pkt	0 Pkt	-28 dBm	13.8 V
1732424892	0 Pkt	0 Pkt	-29 dBm	13.82 V
1732424568	2 Pkt	0 Pkt	-28 dBm	13.82 V
1732424245	3 Pkt	2 Pkt	-29 dBm	13.97 V
1732424245	3 Pkt	2 Pkt	-29 dBm	13.97 V
1732423921	0 Pkt	0 Pkt	-28 dBm	13.82 V
1732423597	0 Pkt	0 Pkt	-30 dBm	13.82 V
1732423274	2 Pkt	0 Pkt	-30 dBm	13.82 V
1732423273	2 Pkt	0 Pkt	-38 dBm	13.82 V
1732422950	0 Pkt	0 Pkt	-30 dBm	13.8 V
1732422626	0 Pkt	0 Pkt	-29 dBm	13.82 V
1732422303	5 Pkt	0 Pkt	-30 dBm	13.82 V
1732421978	1 Pkt	0 Pkt	-30 dBm	13.82 V
1732421654	0 Pkt	0 Pkt	-29 dBm	13.82 V
1732421330	3 Pkt	0 Pkt	-29 dBm	13.82 V
1732421330	3 Pkt	0 Pkt	-29 dBm	13.82 V
1732421006	1 Pkt	0 Pkt	-29 dBm	13.82 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)