This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1768289960 | 36.97 °C | 32.7 %RH | 1012 hPa | 3.74 V | 4 |
| 1768289777 | 36.86 °C | 32.4 %RH | 1012.1 hPa | 3.75 V | 10 |
| 1768289521 | 36.93 °C | 32 %RH | 1012.1 hPa | 3.76 V | 10 |
| 1768288671 | 37.77 °C | 32.3 %RH | 1012.3 hPa | 3.79 V | 9 |
| 1768288491 | 82.8 °C | 828 %RH | 1628 hPa | 3.79 V | 9 |
| 1768288051 | 37.9 °C | 32.2 %RH | 1012.5 hPa | 3.81 V | 11 |
| 1768285656 | 38.2 °C | 32.9 %RH | 1013.3 hPa | 3.87 V | 16 |
| 1768284104 | 35.77 °C | 30 %RH | 1014 hPa | 3.93 V | 17 |
| 1768283671 | 35.66 °C | 30.1 %RH | 1014.2 hPa | 3.94 V | 17 |
| 1768283231 | 35.59 °C | 30.5 %RH | 1014.4 hPa | 3.96 V | 12 |
| 1768282981 | 35.7 °C | 31.2 %RH | 1014.5 hPa | 3.97 V | 15 |
| 1768282060 | 82.8 °C | 100 %RH | 800 hPa | 3.82 V | 15 |
| 1768278613 | 34.45 °C | 47.5 %RH | 1016.1 hPa | 4.18 V | 9 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)