This is the latest recevied telemetry packets stored in our database for station/object S55YRK-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732290021 | 11.3 | -75 | 0 | 0 | 0 |
| 1732289481 | 11.3 | -75 | 0 | 0 | 0 |
| 1732288820 | 11.5 | -76 | 0 | 0 | 0 |
| 1732288220 | 11.5 | -75 | 0 | 0 | 0 |
| 1732287620 | 11.5 | -76 | 0 | 0 | 0 |
| 1732287020 | 11.4 | -75 | 0 | 0 | 0 |
| 1732286421 | 11.4 | -75 | 0 | 0 | 0 |
| 1732285821 | 11.5 | -75 | 0 | 0 | 0 |
| 1732285220 | 11.5 | -76 | 0 | 0 | 0 |
| 1732284620 | 11.5 | -75 | 0 | 0 | 0 |
| 1732284020 | 11.4 | -75 | 0 | 0 | 0 |
| 1732283420 | 11.5 | -76 | 0 | 0 | 0 |
| 1732282820 | 11.5 | -75 | 0 | 0 | 0 |
| 1732282220 | 11.5 | -75 | 0 | 0 | 0 |
| 1732281620 | 11.5 | -75 | 0 | 0 | 0 |
| 1732281021 | 11.6 | -75 | 0 | 0 | 0 |
| 1732280420 | 11.6 | -75 | 0 | 0 | 0 |
| 1732279881 | 11.5 | -75 | 0 | 0 | 0 |
| 1732279221 | 11.6 | -75 | 0 | 0 | 0 |
| 1732278620 | 11.4 | -76 | 0 | 0 | 0 |
| 1732278020 | 11.6 | -75 | 0 | 0 | 0 |
| 1732277420 | 11.4 | -75 | 0 | 0 | 0 |
| 1732276820 | 11.5 | -75 | 0 | 0 | 0 |
| 1732276221 | 11.3 | -75 | 0 | 0 | 0 |
| 1732275620 | 11.4 | -74 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)