APRS Track Direct

My position About ☰

reset

W5GI-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W5GI-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*	InetiGate*
1753628111	225 Pkts	225 Pkts	164 Pkts	32 C	5 Pkts
1753624511	205 Pkts	205 Pkts	125 Pkts	32 C	4 Pkts
1753620911	148 Pkts	148 Pkts	72 Pkts	32 C	4 Pkts
1753617311	137 Pkts	136 Pkts	85 Pkts	32 C	3 Pkts
1753613711	157 Pkts	157 Pkts	85 Pkts	32 C	4 Pkts
1753610111	130 Pkts	130 Pkts	73 Pkts	32 C	4 Pkts
1753606511	158 Pkts	157 Pkts	93 Pkts	32 C	4 Pkts
1753602911	181 Pkts	179 Pkts	82 Pkts	32 C	4 Pkts
1753599311	181 Pkts	177 Pkts	85 Pkts	32 C	4 Pkts
1753595711	135 Pkts	134 Pkts	74 Pkts	32 C	4 Pkts
1753592111	133 Pkts	133 Pkts	78 Pkts	33 C	0 Pkts
1753588511	106 Pkts	106 Pkts	58 Pkts	33 C	1 Pkts
1753584911	92 Pkts	92 Pkts	56 Pkts	33 C	2 Pkts
1753581310	134 Pkts	133 Pkts	86 Pkts	33 C	3 Pkts
1753577710	95 Pkts	95 Pkts	65 Pkts	33 C	0 Pkts
1753574110	123 Pkts	123 Pkts	80 Pkts	33 C	0 Pkts
1753570510	66 Pkts	66 Pkts	37 Pkts	33 C	0 Pkts
1753566910	54 Pkts	53 Pkts	27 Pkts	33 C	0 Pkts
1753563310	34 Pkts	34 Pkts	18 Pkts	34 C	0 Pkts
1753559711	44 Pkts	44 Pkts	33 Pkts	33 C	0 Pkts
1753556111	61 Pkts	61 Pkts	50 Pkts	32 C	0 Pkts
1753552511	62 Pkts	62 Pkts	47 Pkts	33 C	0 Pkts
1753548911	84 Pkts	84 Pkts	74 Pkts	33 C	0 Pkts
1753545311	88 Pkts	88 Pkts	73 Pkts	33 C	0 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)