This is the latest recevied telemetry packets stored in our database for station/object 9W2YIE-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1744811106 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 7 % |
| 1744810181 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 7 % |
| 1744809258 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 7 % |
| 1744808333 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 7 % |
| 1744807407 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 7 % |
| 1744806482 | 0 Pkt | 1 Pkt | 0 Pkt | -57 dBm | 7 % |
| 1744805556 | 0 Pkt | 19 Pkt | 0 Pkt | -60 dBm | 7 % |
| 1744804613 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 7 % |
| 1744803688 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 7 % |
| 1744802762 | 0 Pkt | 11 Pkt | 0 Pkt | -60 dBm | 7 % |
| 1744801827 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 9 % |
| 1744800902 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 13 % |
| 1744799983 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 16 % |
| 1744799052 | 0 Pkt | 1 Pkt | 0 Pkt | -61 dBm | 19 % |
| 1744798126 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 20 % |
| 1744797201 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 22 % |
| 1744796276 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 24 % |
| 1744795351 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 25 % |
| 1744794426 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 24 % |
| 1744793500 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 29 % |
| 1744792575 | 0 Pkt | 1 Pkt | 0 Pkt | -60 dBm | 22 % |
| 1744791649 | 0 Pkt | 23 Pkt | 0 Pkt | -62 dBm | 37 % |
| 1744790701 | 0 Pkt | 108 Pkt | 0 Pkt | -57 dBm | 39 % |
| 1744789668 | 0 Pkt | 6 Pkt | 0 Pkt | -58 dBm | 53 % |
| 1744788739 | 0 Pkt | 3 Pkt | 0 Pkt | -56 dBm | 50 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)