This is the latest recevied telemetry packets stored in our database for station/object YD2WEA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1732258197 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 90 % |
| 1732257953 | 0 Pkt | 0 Pkt | 0 Pkt | -87 dBm | 91 % |
| 1732256812 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 89 % |
| 1732256660 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 83 % |
| 1732256660 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 79 % |
| 1732256409 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 81 % |
| 1732255522 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 75 % |
| 1732255236 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 66 % |
| 1732254830 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 66 % |
| 1732254801 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 68 % |
| 1732254705 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 76 % |
| 1732254377 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 78 % |
| 1732253530 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 81 % |
| 1732253247 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 86 % |
| 1732253247 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 92 % |
| 1732253080 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 96 % |
| 1732250309 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 90 % |
| 1732250230 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 96 % |
| 1732249623 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 96 % |
| 1732249434 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 93 % |
| 1732249364 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 90 % |
| 1732248781 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 92 % |
| 1732247554 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 92 % |
| 1732247249 | 0 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 95 % |
| 1732246958 | 0 Pkt | 0 Pkt | 0 Pkt | -73 dBm | 97 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)