This is the latest recevied telemetry packets stored in our database for station/object IR2ZZN-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Rx10* |
---|---|---|---|---|---|
1744745669 | 14.06 Volt | 50 Pkt | 30 Pkt | 91 Pcnt | 6 Pkt |
1744745369 | 14.06 Volt | 50 Pkt | 30 Pkt | 93 Pcnt | 10 Pkt |
1744745069 | 14.06 Volt | 50 Pkt | 30 Pkt | 91 Pcnt | 10 Pkt |
1744744769 | 14.06 Volt | 50 Pkt | 30 Pkt | 88 Pcnt | 9 Pkt |
1744744469 | 14.06 Volt | 50 Pkt | 30 Pkt | 89 Pcnt | 10 Pkt |
1744744169 | 14.06 Volt | 60 Pkt | 40 Pkt | 88 Pcnt | 10 Pkt |
1744743869 | 14.06 Volt | 70 Pkt | 50 Pkt | 89 Pcnt | 9 Pkt |
1744743569 | 14.06 Volt | 70 Pkt | 50 Pkt | 89 Pcnt | 9 Pkt |
1744743269 | 14.06 Volt | 80 Pkt | 50 Pkt | 88 Pcnt | 8 Pkt |
1744742969 | 14.06 Volt | 80 Pkt | 50 Pkt | 90 Pcnt | 9 Pkt |
1744742669 | 14.06 Volt | 80 Pkt | 50 Pkt | 92 Pcnt | 9 Pkt |
1744742369 | 14.06 Volt | 80 Pkt | 50 Pkt | 91 Pcnt | 7 Pkt |
1744742069 | 14.06 Volt | 80 Pkt | 50 Pkt | 91 Pcnt | 8 Pkt |
1744741769 | 14.06 Volt | 80 Pkt | 50 Pkt | 92 Pcnt | 7 Pkt |
1744741469 | 14.06 Volt | 80 Pkt | 50 Pkt | 92 Pcnt | 14 Pkt |
1744741169 | 14.06 Volt | 90 Pkt | 50 Pkt | 95 Pcnt | 26 Pkt |
1744740869 | 14.06 Volt | 90 Pkt | 50 Pkt | 93 Pcnt | 25 Pkt |
1744740569 | 14.06 Volt | 80 Pkt | 40 Pkt | 96 Pcnt | 14 Pkt |
1744740269 | 14.06 Volt | 80 Pkt | 30 Pkt | 95 Pcnt | 12 Pkt |
1744739969 | 14.06 Volt | 80 Pkt | 30 Pkt | 94 Pcnt | 10 Pkt |
1744739669 | 14.06 Volt | 80 Pkt | 30 Pkt | 95 Pcnt | 11 Pkt |
1744739369 | 14.06 Volt | 80 Pkt | 30 Pkt | 91 Pcnt | 11 Pkt |
1744739069 | 14.06 Volt | 70 Pkt | 20 Pkt | 88 Pcnt | 8 Pkt |
1744738770 | 14.06 Volt | 70 Pkt | 20 Pkt | 87 Pcnt | 13 Pkt |
1744738469 | 14.06 Volt | 70 Pkt | 20 Pkt | 87 Pcnt | 14 Pkt |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Rx10: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)