APRS Track Direct

My position About ☰

reset

SR5E Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5E. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPU Temp*	CPU Usage*	Temp DS1*	Temp DS2*
1732286403	47 Deg.C	2 %	38.1 Deg.C	38.1 Deg.C
1732285806	47 Deg.C	2 %	45.8 Deg.C	45.8 Deg.C
1732285203	47 Deg.C	2 %	45.8 Deg.C	45.8 Deg.C
1732284606	46 Deg.C	2 %	44.9 Deg.C	44.9 Deg.C
1732284002	47 Deg.C	2 %	37.7 Deg.C	37.7 Deg.C
1732283402	46 Deg.C	2 %	30 Deg.C	30 Deg.C
1732282806	46 Deg.C	2 %	29.8 Deg.C	29.8 Deg.C
1732282203	47 Deg.C	2 %	29.9 Deg.C	29.9 Deg.C
1732281606	47 Deg.C	2 %	30 Deg.C	30 Deg.C
1732281003	47 Deg.C	2 %	31.4 Deg.C	31.4 Deg.C
1732280406	47 Deg.C	2 %	33.6 Deg.C	33.6 Deg.C
1732279803	47 Deg.C	2 %	38.1 Deg.C	38.1 Deg.C
1732279203	47 Deg.C	2 %	41.7 Deg.C	41.7 Deg.C
1732278607	46 Deg.C	2 %	32.7 Deg.C	32.7 Deg.C
1732278002	47 Deg.C	2 %	36.9 Deg.C	36.9 Deg.C
1732277406	47 Deg.C	2 %	45.7 Deg.C	45.7 Deg.C
1732276803	47 Deg.C	2 %	45.3 Deg.C	45.3 Deg.C
1732276206	46 Deg.C	2 %	45.4 Deg.C	45.4 Deg.C
1732275603	46 Deg.C	2 %	45 Deg.C	45 Deg.C
1732275003	45 Deg.C	2 %	40.1 Deg.C	40.1 Deg.C
1732274406	46 Deg.C	2 %	35.4 Deg.C	35.4 Deg.C
1732273803	45 Deg.C	2 %	31.4 Deg.C	31.4 Deg.C
1732273207	46 Deg.C	2 %	33.6 Deg.C	33.6 Deg.C
1732272602	46 Deg.C	2 %	31.8 Deg.C	31.8 Deg.C
1732272006	46 Deg.C	2 %	35.3 Deg.C	35.3 Deg.C

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

CPU Usage: 0, 1, 0

Temp DS1: 0, 0.1, 0

Temp DS2: 0, 0.1, 0

Value5: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)