This is the latest recevied telemetry packets stored in our database for station/object S59EHI-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vcc* | Vbat* | Bhp* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786785921 | 5.03 V | 4.12 V | 91 % | 0 | 0 |
| 1786785625 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786785320 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786785021 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786784721 | 5.06 V | 4.12 V | 91 % | 0 | 0 |
| 1786784421 | 5.02 V | 4.13 V | 92 % | 0 | 0 |
| 1786784121 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786783821 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786783525 | 5.08 V | 4.12 V | 91 % | 0 | 0 |
| 1786783221 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786782922 | 5.07 V | 4.12 V | 90 % | 0 | 0 |
| 1786782621 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786782325 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786782020 | 5.06 V | 4.12 V | 91 % | 0 | 0 |
| 1786781723 | 5.06 V | 4.12 V | 90 % | 0 | 0 |
| 1786781421 | 5.03 V | 4.12 V | 91 % | 0 | 0 |
| 1786781126 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786780821 | 5.03 V | 4.13 V | 92 % | 0 | 0 |
| 1786780525 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786780224 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786779920 | 5.07 V | 4.12 V | 91 % | 0 | 0 |
| 1786779802 | 5.06 V | 4.12 V | 91 % | 0 | 0 |
| 1786779322 | 5.06 V | 4.12 V | 91 % | 0 | 0 |
| 1786778721 | 5.07 V | 4.12 V | 90 % | 0 | 0 |
| 1786778422 | 5.03 V | 4.12 V | 91 % | 0 | 0 |
*Used Equation Coefficients:
Vcc: 0, 1, 0
Vbat: 0, 1, 0
Bhp: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)