This is the latest recevied telemetry packets stored in our database for station/object PP1GEC-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744735871 | 185 | 6 | 1 | 76 | 0 |
| 1744734070 | 185 | 9 | 2 | 74 | 0 |
| 1744732268 | 185 | 11 | 4 | 80 | 0 |
| 1744730466 | 185 | 12 | 5 | 78 | 0 |
| 1744728664 | 185 | 14 | 6 | 75 | 0 |
| 1744726863 | 185 | 14 | 7 | 75 | 0 |
| 1744725061 | 185 | 11 | 5 | 75 | 0 |
| 1744723259 | 185 | 7 | 2 | 71 | 0 |
| 1744721458 | 185 | 7 | 1 | 69 | 0 |
| 1744717854 | 185 | 8 | 2 | 82 | 0 |
| 1744716052 | 185 | 10 | 3 | 86 | 0 |
| 1744714251 | 185 | 10 | 3 | 83 | 0 |
| 1744712449 | 185 | 10 | 3 | 85 | 0 |
| 1744710647 | 185 | 10 | 3 | 85 | 0 |
| 1744708846 | 185 | 11 | 3 | 85 | 0 |
| 1744707044 | 185 | 10 | 3 | 84 | 0 |
| 1744705242 | 185 | 10 | 2 | 78 | 0 |
| 1744703440 | 185 | 11 | 2 | 82 | 0 |
| 1744701638 | 185 | 11 | 3 | 85 | 0 |
| 1744699837 | 185 | 10 | 2 | 82 | 0 |
| 1744698035 | 185 | 9 | 2 | 80 | 0 |
| 1744696233 | 185 | 9 | 2 | 83 | 0 |
| 1744690828 | 185 | 9 | 2 | 84 | 0 |
| 1744689027 | 185 | 9 | 2 | 86 | 0 |
| 1744685426 | 185 | 9 | 2 | 85 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)