APRS Track Direct

My position About ☰

reset

IQ3VO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3VO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg10m*	DgR*	Eff*
1732287641	13.28 Pkt	910 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732287340	13.28 Pkt	900 Pkt	0 Pkt	1.32 Pcnt	37 Pcnt
1732287040	12.68 Pkt	910 Pkt	0 Pkt	1.32 Pcnt	37 Pcnt
1732286740	12.68 Pkt	920 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732286440	13.28 Pkt	910 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732286139	13.28 Pkt	910 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732285839	13.28 Pkt	900 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732285539	13.28 Pkt	910 Pkt	0 Pkt	1.32 Pcnt	37 Pcnt
1732285238	13.28 Pkt	890 Pkt	0 Pkt	1.32 Pcnt	37 Pcnt
1732284938	13.28 Pkt	880 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732284638	13.28 Pkt	860 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732284337	13.28 Pkt	860 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732284037	13.35 Pkt	850 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732283737	13.28 Pkt	830 Pkt	0 Pkt	1.32 Pcnt	37 Pcnt
1732283437	13.28 Pkt	830 Pkt	1 Pkt	1.32 Pcnt	37 Pcnt
1732283136	13.28 Pkt	830 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt
1732282836	13.28 Pkt	820 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt
1732282536	13.28 Pkt	800 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt
1732282236	13.28 Pkt	800 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt
1732281935	13.28 Pkt	800 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt
1732281635	13.28 Pkt	810 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt
1732281335	13.28 Pkt	800 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt
1732281034	13.28 Pkt	810 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt
1732280734	13.28 Pkt	800 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt
1732280434	12.68 Pkt	790 Pkt	2 Pkt	1.32 Pcnt	37 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)