This is the latest recevied telemetry packets stored in our database for station/object VK7DIK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1836274603 | 13.88 Volt | 290 Pkt | 0 Pkt | 97 Pcnt | 0 None |
| 1836274453 | 13.88 Volt | 280 Pkt | 0 Pkt | 97 Pcnt | 0 None |
| 1836274303 | 13.88 Volt | 280 Pkt | 0 Pkt | 97 Pcnt | 0 None |
| 1836274153 | 13.88 Volt | 280 Pkt | 0 Pkt | 98 Pcnt | 0 None |
| 1836274003 | 13.88 Volt | 290 Pkt | 0 Pkt | 98 Pcnt | 0 None |
| 1779759100 | 13.88 Volt | 120 Pkt | 0 Pkt | 68 Pcnt | 0 None |
| 1779758800 | 13.88 Volt | 120 Pkt | 0 Pkt | 67 Pcnt | 0 None |
| 1779758500 | 13.88 Volt | 110 Pkt | 0 Pkt | 67 Pcnt | 0 None |
| 1779758200 | 13.88 Volt | 110 Pkt | 0 Pkt | 66 Pcnt | 0 None |
| 1779757900 | 13.88 Volt | 100 Pkt | 0 Pkt | 64 Pcnt | 0 None |
| 1779757600 | 13.88 Volt | 110 Pkt | 0 Pkt | 63 Pcnt | 0 None |
| 1779757300 | 13.88 Volt | 120 Pkt | 0 Pkt | 63 Pcnt | 0 None |
| 1779757000 | 13.88 Volt | 120 Pkt | 0 Pkt | 60 Pcnt | 0 None |
| 1779756700 | 13.88 Volt | 120 Pkt | 0 Pkt | 60 Pcnt | 0 None |
| 1779756400 | 13.88 Volt | 120 Pkt | 0 Pkt | 60 Pcnt | 0 None |
| 1779756100 | 13.88 Volt | 120 Pkt | 0 Pkt | 60 Pcnt | 0 None |
| 1779755800 | 13.88 Volt | 130 Pkt | 0 Pkt | 60 Pcnt | 0 None |
| 1779755500 | 13.88 Volt | 120 Pkt | 0 Pkt | 59 Pcnt | 0 None |
| 1779755200 | 13.88 Volt | 110 Pkt | 0 Pkt | 59 Pcnt | 0 None |
| 1779754900 | 13.88 Volt | 110 Pkt | 0 Pkt | 58 Pcnt | 0 None |
| 1779754600 | 13.88 Volt | 110 Pkt | 0 Pkt | 58 Pcnt | 0 None |
| 1779754300 | 13.88 Volt | 110 Pkt | 0 Pkt | 59 Pcnt | 0 None |
| 1779754000 | 13.88 Volt | 110 Pkt | 0 Pkt | 60 Pcnt | 0 None |
| 1779753700 | 13.88 Volt | 100 Pkt | 0 Pkt | 59 Pcnt | 0 None |
| 1779753400 | 13.88 Volt | 90 Pkt | 0 Pkt | 62 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)