This is the latest recevied telemetry packets stored in our database for station/object 9W2ATR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732300502 | 421 | 0 | 0 | 0 | 0 |
| 1732299602 | 416 | 0 | 0 | 0 | 0 |
| 1732298702 | 420 | 0 | 0 | 0 | 0 |
| 1732297802 | 416 | 0 | 0 | 0 | 0 |
| 1732296902 | 414 | 0 | 0 | 0 | 0 |
| 1732296002 | 416 | 0 | 0 | 0 | 0 |
| 1732295102 | 408 | 0 | 0 | 0 | 0 |
| 1732294202 | 408 | 0 | 0 | 0 | 0 |
| 1732293302 | 423 | 0 | 0 | 0 | 0 |
| 1732292401 | 414 | 0 | 0 | 0 | 0 |
| 1732291501 | 411 | 0 | 0 | 0 | 0 |
| 1732290601 | 421 | 0 | 0 | 0 | 0 |
| 1732289701 | 419 | 0 | 0 | 0 | 0 |
| 1732288801 | 409 | 0 | 0 | 0 | 0 |
| 1732287901 | 420 | 0 | 0 | 0 | 0 |
| 1732287001 | 418 | 0 | 0 | 0 | 0 |
| 1732286101 | 417 | 0 | 0 | 0 | 0 |
| 1732285201 | 410 | 0 | 0 | 0 | 0 |
| 1732284300 | 423 | 0 | 0 | 0 | 0 |
| 1732283401 | 422 | 0 | 0 | 0 | 0 |
| 1732282500 | 423 | 0 | 0 | 0 | 0 |
| 1732281599 | 413 | 0 | 0 | 0 | 0 |
| 1732280699 | 422 | 0 | 0 | 0 | 0 |
| 1732279799 | 413 | 0 | 0 | 0 | 0 |
| 1732278899 | 416 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)