This is the latest recevied telemetry packets stored in our database for station/object MAGMTN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745053240 | 12.66 Volts | 75 deg.F | 0 | 0 | 0 |
| 1745052125 | 12.66 Volts | 75 deg.F | 0 | 0 | 0 |
| 1745051026 | 12.68 Volts | 75 deg.F | 0 | 0 | 0 |
| 1745049850 | 12.68 Volts | 76 deg.F | 0 | 0 | 0 |
| 1745048600 | 12.7 Volts | 75 deg.F | 0 | 0 | 0 |
| 1745047497 | 12.72 Volts | 76 deg.F | 0 | 0 | 0 |
| 1745046284 | 12.72 Volts | 75 deg.F | 0 | 0 | 0 |
| 1745045090 | 12.76 Volts | 75 deg.F | 0 | 0 | 0 |
| 1745044080 | 12.76 Volts | 76 deg.F | 0 | 0 | 0 |
| 1745042960 | 12.78 Volts | 76 deg.F | 0 | 0 | 0 |
| 1745041915 | 12.78 Volts | 76 deg.F | 0 | 0 | 0 |
| 1745040735 | 12.8 Volts | 76 deg.F | 0 | 0 | 0 |
| 1745039485 | 12.82 Volts | 77 deg.F | 0 | 0 | 0 |
| 1745038302 | 12.82 Volts | 77 deg.F | 0 | 0 | 0 |
| 1745037050 | 12.86 Volts | 77 deg.F | 0 | 0 | 0 |
| 1745035912 | 12.86 Volts | 78 deg.F | 0 | 0 | 0 |
| 1745034790 | 12.88 Volts | 78 deg.F | 0 | 0 | 0 |
| 1745033620 | 12.9 Volts | 78 deg.F | 0 | 0 | 0 |
| 1745032529 | 12.9 Volts | 79 deg.F | 0 | 0 | 0 |
| 1745031365 | 12.92 Volts | 80 deg.F | 0 | 0 | 0 |
| 1745030360 | 12.94 Volts | 82 deg.F | 0 | 0 | 0 |
| 1745029302 | 12.94 Volts | 82 deg.F | 0 | 0 | 0 |
| 1745028160 | 12.99 Volts | 83 deg.F | 0 | 0 | 0 |
| 1745027020 | 13.05 Volts | 83 deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)