APRS Track Direct

My position About ☰

reset

OK9DOB-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK9DOB-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	GasCounter*	ExtTemp*	ExtHum*	SysPres*	SysTemp*
1744866632	0.12 m3	15.3 deg.C	99 %	1005.1 Pa	28 deg.C
1744866029	0.12 m3	15.1 deg.C	99 %	1005.1 Pa	28 deg.C
1744865425	0.12 m3	14.8 deg.C	99 %	1005 Pa	28 deg.C
1744864823	0.12 m3	14.8 deg.C	99 %	1005 Pa	28 deg.C
1744864222	0.12 m3	14.7 deg.C	99 %	1005 Pa	28 deg.C
1744863613	0.12 m3	14.7 deg.C	99 %	1005 Pa	28 deg.C
1744863009	0.12 m3	14.9 deg.C	99 %	1005.1 Pa	28 deg.C
1744862407	0.12 m3	14.8 deg.C	99 %	1005 Pa	28.1 deg.C
1744861803	0.12 m3	14.7 deg.C	99 %	1005 Pa	28.1 deg.C
1744861201	0.12 m3	14.7 deg.C	99 %	1005.1 Pa	28.1 deg.C
1744860598	0.12 m3	14.8 deg.C	99 %	1005.1 Pa	28.1 deg.C
1744859996	0.12 m3	14.9 deg.C	99 %	1005 Pa	28.1 deg.C
1744859393	0.12 m3	15 deg.C	99 %	1004.9 Pa	28.1 deg.C
1744858791	0 m3	14.8 deg.C	99 %	1005.1 Pa	28.1 deg.C
1744858188	0 m3	14.7 deg.C	99 %	1005.2 Pa	28.1 deg.C
1744857585	0 m3	14.8 deg.C	99 %	1005.2 Pa	28.1 deg.C
1744856982	0 m3	15.3 deg.C	99 %	1005.3 Pa	28.1 deg.C
1744856380	0 m3	15.3 deg.C	99 %	1005.2 Pa	28.1 deg.C
1744855778	0 m3	15.4 deg.C	99 %	1005.2 Pa	28.1 deg.C
1744855174	0 m3	15.4 deg.C	99 %	1005.1 Pa	28.2 deg.C
1744854571	0 m3	15.4 deg.C	99 %	1005.3 Pa	28.2 deg.C
1744853967	0 m3	15.4 deg.C	98 %	1005.1 Pa	28.1 deg.C

*Used Equation Coefficients:

GasCounter: 0, 0.01, 0

ExtTemp: 0, 0.1, 0

ExtHum: 0, 1, 0

SysPres: 0, 0.1, 0

SysTemp: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)