This is the latest recevied telemetry packets stored in our database for station/object DF7PN-22. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1745065144 | 982.8 hPa | 27.6 C deg | 26.8 % | 1006.8 hPa | 0 C deg |
| 1745063344 | 982.8 hPa | 27.7 C deg | 26.7 % | 1006.8 hPa | 0 C deg |
| 1745061544 | 983.1 hPa | 27.6 C deg | 26.8 % | 1007.1 hPa | 0 C deg |
| 1745059743 | 983.4 hPa | 27.5 C deg | 26.9 % | 1007.4 hPa | 0 C deg |
| 1745057943 | 983.7 hPa | 27.5 C deg | 26.8 % | 1007.8 hPa | 0 C deg |
| 1745056143 | 984 hPa | 27.2 C deg | 27 % | 1008.1 hPa | 0 C deg |
| 1745054343 | 984.3 hPa | 27.1 C deg | 27 % | 1008.4 hPa | 0 C deg |
| 1745052543 | 984.5 hPa | 26.9 C deg | 27 % | 1008.6 hPa | 0 C deg |
| 1745050743 | 984.6 hPa | 26.6 C deg | 27.1 % | 1008.7 hPa | 0 C deg |
| 1745048943 | 984.7 hPa | 26.3 C deg | 27.2 % | 1008.8 hPa | 0 C deg |
| 1745047143 | 984.8 hPa | 26.1 C deg | 27.4 % | 1009 hPa | 0 C deg |
| 1745045343 | 984.8 hPa | 26.1 C deg | 27.3 % | 1009 hPa | 0 C deg |
| 1745043542 | 984.8 hPa | 25.9 C deg | 27.4 % | 1009.1 hPa | 0 C deg |
| 1745041742 | 984.8 hPa | 25.6 C deg | 27.6 % | 1009.1 hPa | 0 C deg |
| 1745039942 | 985 hPa | 25.5 C deg | 27.8 % | 1009.3 hPa | 0 C deg |
| 1745038142 | 985.1 hPa | 25.5 C deg | 27.8 % | 1009.3 hPa | 0 C deg |
| 1745036342 | 985 hPa | 25.6 C deg | 27.8 % | 1009.2 hPa | 0 C deg |
| 1745034541 | 984.8 hPa | 25.5 C deg | 27.9 % | 1009.1 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)