This is the latest recevied telemetry packets stored in our database for station/object LANEMT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719853870 | 61 | 82 | 0 | 173 | 178 |
1719852672 | 66 | 114 | 0 | 173 | 178 |
1719851470 | 66 | 88 | 0 | 172 | 178 |
1719850270 | 68 | 100 | 1 | 170 | 178 |
1719849071 | 67 | 106 | 2 | 168 | 178 |
1719847871 | 68 | 94 | 3 | 167 | 178 |
1719846671 | 71 | 90 | 3 | 166 | 179 |
1719845471 | 72 | 105 | 3 | 165 | 179 |
1719844271 | 69 | 107 | 3 | 164 | 179 |
1719843071 | 67 | 109 | 2 | 163 | 178 |
1719841871 | 63 | 102 | 1 | 162 | 179 |
1719840672 | 60 | 96 | 1 | 162 | 178 |
1719839471 | 57 | 104 | 1 | 162 | 179 |
1719838272 | 55 | 77 | 0 | 163 | 178 |
1719837071 | 49 | 86 | 0 | 163 | 179 |
1719835871 | 47 | 84 | 0 | 163 | 178 |
1719834671 | 46 | 62 | 0 | 163 | 179 |
1719833473 | 46 | 66 | 0 | 164 | 179 |
1719832271 | 47 | 74 | 0 | 164 | 179 |
1719831071 | 50 | 74 | 0 | 164 | 179 |
1719829871 | 51 | 73 | 0 | 165 | 179 |
1719828671 | 51 | 73 | 0 | 165 | 179 |
1719827471 | 51 | 90 | 0 | 165 | 179 |
1719826271 | 50 | 82 | 0 | 166 | 179 |
1719825071 | 50 | 73 | 0 | 166 | 179 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)