This is the latest recevied telemetry packets stored in our database for station/object SR2GR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU Temp* | CPU Usage* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1733325002 | 27 Deg.C | 2 % | 0 | 0 | 0 |
| 1733323802 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733323202 | 30 Deg.C | 2 % | 0 | 0 | 0 |
| 1733322604 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733322002 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733321404 | 28 Deg.C | 2 % | 0 | 0 | 0 |
| 1733320802 | 27 Deg.C | 2 % | 0 | 0 | 0 |
| 1733320204 | 28 Deg.C | 2 % | 0 | 0 | 0 |
| 1733319601 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733319002 | 30 Deg.C | 2 % | 0 | 0 | 0 |
| 1733318404 | 28 Deg.C | 2 % | 0 | 0 | 0 |
| 1733317802 | 28 Deg.C | 2 % | 0 | 0 | 0 |
| 1733317204 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733316602 | 28 Deg.C | 2 % | 0 | 0 | 0 |
| 1733316003 | 28 Deg.C | 2 % | 0 | 0 | 0 |
| 1733315401 | 30 Deg.C | 2 % | 0 | 0 | 0 |
| 1733314802 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733314204 | 28 Deg.C | 2 % | 0 | 0 | 0 |
| 1733313602 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733313004 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733312402 | 26 Deg.C | 2 % | 0 | 0 | 0 |
| 1733311804 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733311202 | 29 Deg.C | 2 % | 0 | 0 | 0 |
| 1733310602 | 27 Deg.C | 2 % | 0 | 0 | 0 |
| 1733310004 | 29 Deg.C | 2 % | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU Temp: 0, 0.1, 0
CPU Usage: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)