APRS Track Direct

My position About ☰

reset

9A4QV-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A4QV-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1836274737	12.38 Volt	1290 Pkt	60 Pcnt	27.15 C°
1770126591	12.3 Volt	1100 Pkt	64 Pcnt	24.98 C°
1770124791	12.3 Volt	1100 Pkt	64 Pcnt	24.98 C°
1770122992	12.3 Volt	1100 Pkt	65 Pcnt	24.98 C°
1770121192	12.3 Volt	1110 Pkt	64 Pcnt	24.84 C°
1770119392	12.3 Volt	1120 Pkt	63 Pcnt	24.84 C°
1770117592	12.3 Volt	1130 Pkt	64 Pcnt	24.84 C°
1770115792	12.3 Volt	1120 Pkt	63 Pcnt	24.98 C°
1770113992	12.3 Volt	1160 Pkt	63 Pcnt	24.98 C°
1770112192	12.3 Volt	1120 Pkt	66 Pcnt	24.98 C°
1770110392	12.3 Volt	1000 Pkt	67 Pcnt	24.84 C°
1770108592	12.3 Volt	1000 Pkt	68 Pcnt	24.84 C°
1770106792	12.3 Volt	930 Pkt	69 Pcnt	24.98 C°
1770104992	12.3 Volt	840 Pkt	68 Pcnt	24.98 C°
1770103192	12.3 Volt	890 Pkt	66 Pcnt	25.13 C°
1770101392	12.3 Volt	990 Pkt	69 Pcnt	25.13 C°
1770099592	12.3 Volt	960 Pkt	69 Pcnt	25.27 C°
1770097792	12.3 Volt	880 Pkt	66 Pcnt	25.27 C°
1770095992	12.3 Volt	850 Pkt	66 Pcnt	25.27 C°
1770094192	12.3 Volt	830 Pkt	65 Pcnt	25.41 C°
1770092392	12.3 Volt	790 Pkt	65 Pcnt	25.27 C°
1770090592	12.3 Volt	800 Pkt	64 Pcnt	25.41 C°
1770088792	12.3 Volt	820 Pkt	63 Pcnt	25.56 C°
1770086993	12.3 Volt	860 Pkt	66 Pcnt	25.7 C°
1770085193	12.3 Volt	900 Pkt	68 Pcnt	25.85 C°

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.1444, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)