This is the latest recevied telemetry packets stored in our database for station/object MAGMTN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749315795 | 13.96 Volts | 113 deg.F | 0 | 0 | 0 |
| 1749314623 | 13.98 Volts | 111 deg.F | 0 | 0 | 0 |
| 1749313580 | 13.96 Volts | 111 deg.F | 0 | 0 | 0 |
| 1749312325 | 13.98 Volts | 108 deg.F | 0 | 0 | 0 |
| 1749311272 | 14.61 Volts | 107 deg.F | 0 | 0 | 0 |
| 1749310017 | 14.61 Volts | 104 deg.F | 0 | 0 | 0 |
| 1749308994 | 14.63 Volts | 104 deg.F | 0 | 0 | 0 |
| 1749307885 | 14.22 Volts | 101 deg.F | 0 | 0 | 0 |
| 1749306695 | 13.72 Volts | 100 deg.F | 0 | 0 | 0 |
| 1749305500 | 13.29 Volts | 98 deg.F | 0 | 0 | 0 |
| 1749304430 | 13.03 Volts | 96 deg.F | 0 | 0 | 0 |
| 1749303247 | 12.9 Volts | 91 deg.F | 0 | 0 | 0 |
| 1749302074 | 12.78 Volts | 91 deg.F | 0 | 0 | 0 |
| 1749300843 | 12.7 Volts | 89 deg.F | 0 | 0 | 0 |
| 1749299640 | 12.66 Volts | 89 deg.F | 0 | 0 | 0 |
| 1749298605 | 12.62 Volts | 89 deg.F | 0 | 0 | 0 |
| 1749297603 | 12.56 Volts | 91 deg.F | 0 | 0 | 0 |
| 1749296450 | 12.58 Volts | 89 deg.F | 0 | 0 | 0 |
| 1749295220 | 12.58 Volts | 89 deg.F | 0 | 0 | 0 |
| 1749294055 | 12.58 Volts | 89 deg.F | 0 | 0 | 0 |
| 1749293030 | 12.62 Volts | 89 deg.F | 0 | 0 | 0 |
| 1749291895 | 12.62 Volts | 89 deg.F | 0 | 0 | 0 |
| 1749290760 | 12.62 Volts | 91 deg.F | 0 | 0 | 0 |
| 1749289663 | 12.64 Volts | 89 deg.F | 0 | 0 | 0 |
| 1749288483 | 12.66 Volts | 89 deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)