This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | CPU* | Ambient* | Value5* |
|---|---|---|---|---|---|
| 1790650205 | 1364 | 84 | 46.2 | 69.7 | 0 |
| 1790649640 | 1363 | 84.8 | 46.7 | 70.2 | 0 |
| 1790649004 | 1363 | 85.6 | 47.2 | 71 | 0 |
| 1790648441 | 1355 | 86.4 | 47.8 | 71.8 | 0 |
| 1790647805 | 1366 | 87.6 | 48.3 | 73.1 | 0 |
| 1790647241 | 1363 | 88.7 | 48.9 | 74.4 | 0 |
| 1790646605 | 1361 | 89.9 | 49.4 | 74.8 | 0 |
| 1790646040 | 1363 | 90.8 | 50.5 | 75.6 | 0 |
| 1790645404 | 1369 | 91.8 | 50.5 | 76.7 | 0 |
| 1790644841 | 1364 | 92.6 | 51 | 77.6 | 0 |
| 1790644205 | 1363 | 93.5 | 51.5 | 78.4 | 0 |
| 1790643641 | 1366 | 94 | 52.6 | 79 | 0 |
| 1790643005 | 1363 | 94.9 | 52.6 | 79.9 | 0 |
| 1790642440 | 1363 | 95.3 | 52.6 | 80.5 | 0 |
| 1790641804 | 1363 | 95.9 | 53.7 | 81.2 | 0 |
| 1790641241 | 1363 | 96.4 | 53.2 | 81.7 | 0 |
| 1790640604 | 1364 | 96.9 | 53.7 | 82.2 | 0 |
| 1790640041 | 1364 | 97.2 | 53.7 | 82.7 | 0 |
| 1790639405 | 1363 | 97.9 | 54.8 | 83.4 | 0 |
| 1790638840 | 1361 | 98.3 | 54.2 | 84 | 0 |
| 1790638205 | 1364 | 98.7 | 55.3 | 84.5 | 0 |
| 1790637640 | 1364 | 98.9 | 54.8 | 84.8 | 0 |
| 1790637004 | 1366 | 99.2 | 54.8 | 84.9 | 0 |
| 1790636441 | 1364 | 99.4 | 54.8 | 85.3 | 0 |
| 1790635805 | 1367 | 99.7 | 54.8 | 85.7 | 0 |
*Used Equation Coefficients:
DC: 0, 1, 1000
PC Board: 0, 0.1, 0
CPU: 0, 0.1, 0
Ambient: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)