APRS Track Direct

My position About ☰

reset

SA0AZS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SA0AZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1744959478	0.79 Load	49.77 DegC	101 Mb	10709 Pkt	430 Pkt
1744958578	0.63 Load	48.69 DegC	101 Mb	11014 Pkt	444 Pkt
1744957678	0.6 Load	49.23 DegC	101 Mb	10598 Pkt	437 Pkt
1744956779	0.68 Load	49.23 DegC	101 Mb	10722 Pkt	442 Pkt
1744955879	0.61 Load	48.69 DegC	101 Mb	9385 Pkt	429 Pkt
1744954978	0.57 Load	49.23 DegC	101 Mb	9618 Pkt	438 Pkt
1744954078	0.69 Load	49.77 DegC	101 Mb	10105 Pkt	430 Pkt
1744953192	0.61 Load	49.23 DegC	101 Mb	9673 Pkt	442 Pkt
1744952278	0.67 Load	49.23 DegC	101 Mb	10304 Pkt	427 Pkt
1744951378	0.75 Load	48.69 DegC	101 Mb	10102 Pkt	442 Pkt
1744950478	0.63 Load	48.69 DegC	101 Mb	9963 Pkt	450 Pkt
1744949578	0.69 Load	48.69 DegC	101 Mb	9645 Pkt	436 Pkt
1744948677	0.71 Load	49.23 DegC	101 Mb	9951 Pkt	431 Pkt
1744947777	0.57 Load	49.23 DegC	101 Mb	9858 Pkt	446 Pkt
1744946877	0.61 Load	48.69 DegC	101 Mb	9219 Pkt	437 Pkt
1744945997	0.73 Load	49.23 DegC	101 Mb	9734 Pkt	442 Pkt
1744945082	0.66 Load	48.69 DegC	101 Mb	10048 Pkt	437 Pkt
1744944177	0.62 Load	48.69 DegC	101 Mb	10193 Pkt	438 Pkt
1744943278	0.73 Load	48.69 DegC	101 Mb	10511 Pkt	435 Pkt
1744942377	0.63 Load	48.69 DegC	102 Mb	9810 Pkt	440 Pkt
1744941478	0.75 Load	48.69 DegC	102 Mb	11642 Pkt	454 Pkt
1744940578	0.6 Load	49.23 DegC	81 Mb	10041 Pkt	436 Pkt
1744939677	0.6 Load	48.69 DegC	81 Mb	10406 Pkt	443 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)