This is the latest recevied telemetry packets stored in our database for station/object SP7KGO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782498244 | 20 Count | 51 Count | 19 Count | 3.89 VDC | 0.08 VDC |
| 1782496442 | 469 Count | 1026 Count | 400 Count | 3.9 VDC | 0.08 VDC |
| 1782494640 | 447 Count | 974 Count | 381 Count | 3.86 VDC | 0.08 VDC |
| 1782492839 | 433 Count | 936 Count | 368 Count | 3.89 VDC | 0.08 VDC |
| 1782491037 | 416 Count | 890 Count | 354 Count | 3.91 VDC | 0.08 VDC |
| 1782489235 | 409 Count | 874 Count | 348 Count | 3.86 VDC | 0.08 VDC |
| 1782487434 | 401 Count | 854 Count | 343 Count | 3.87 VDC | 0.08 VDC |
| 1782485632 | 396 Count | 836 Count | 339 Count | 3.86 VDC | 0.08 VDC |
| 1782483830 | 390 Count | 819 Count | 335 Count | 3.89 VDC | 0.08 VDC |
| 1782482029 | 382 Count | 790 Count | 329 Count | 3.88 VDC | 0.08 VDC |
| 1782480245 | 376 Count | 775 Count | 324 Count | 3.89 VDC | 0.08 VDC |
| 1782478443 | 369 Count | 761 Count | 320 Count | 3.91 VDC | 0.08 VDC |
| 1782476642 | 363 Count | 746 Count | 315 Count | 3.89 VDC | 0.08 VDC |
| 1782474840 | 351 Count | 729 Count | 306 Count | 3.86 VDC | 0.08 VDC |
| 1782473039 | 345 Count | 717 Count | 301 Count | 3.9 VDC | 0.08 VDC |
| 1782471237 | 338 Count | 699 Count | 296 Count | 3.87 VDC | 0.08 VDC |
| 1782469435 | 331 Count | 686 Count | 291 Count | 3.9 VDC | 0.08 VDC |
| 1782467634 | 322 Count | 671 Count | 286 Count | 3.89 VDC | 0.08 VDC |
| 1782465832 | 313 Count | 660 Count | 282 Count | 3.89 VDC | 0.08 VDC |
| 1782464031 | 307 Count | 644 Count | 277 Count | 3.9 VDC | 0.08 VDC |
| 1782462229 | 300 Count | 632 Count | 273 Count | 3.87 VDC | 0.08 VDC |
| 1782460428 | 293 Count | 617 Count | 267 Count | 3.87 VDC | 0.08 VDC |
| 1782458655 | 285 Count | 601 Count | 262 Count | 3.91 VDC | 0.08 VDC |
| 1782456854 | 278 Count | 581 Count | 256 Count | 3.86 VDC | 0.08 VDC |
| 1782455052 | 271 Count | 567 Count | 251 Count | 3.88 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)