This is the latest recevied telemetry packets stored in our database for station/object VE7BEU-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770138114 | 8 | 707 | 416 | 20 | 0 |
| 1770136867 | 10 | 705 | 416 | 25 | 0 |
| 1770135623 | 9 | 706 | 416 | 23 | 0 |
| 1770133125 | 8 | 701 | 417 | 21 | 0 |
| 1770131886 | 8 | 701 | 416 | 20 | 0 |
| 1770130643 | 6 | 701 | 416 | 21 | 0 |
| 1770129403 | 6 | 706 | 417 | 19 | 0 |
| 1770128157 | 5 | 707 | 416 | 20 | 0 |
| 1770126904 | 5 | 706 | 416 | 22 | 0 |
| 1770125654 | 6 | 706 | 412 | 22 | 0 |
| 1770124412 | 8 | 709 | 417 | 20 | 0 |
| 1770123155 | 6 | 710 | 417 | 24 | 0 |
| 1770121848 | 7 | 708 | 417 | 22 | 0 |
| 1770118097 | 6 | 710 | 416 | 22 | 0 |
| 1770116814 | 8 | 713 | 417 | 23 | 0 |
| 1770115556 | 8 | 715 | 417 | 21 | 0 |
| 1770114302 | 6 | 716 | 417 | 21 | 0 |
| 1770113051 | 6 | 717 | 416 | 23 | 0 |
| 1770111824 | 7 | 717 | 417 | 22 | 0 |
| 1770110573 | 6 | 721 | 416 | 23 | 0 |
| 1770109318 | 4 | 721 | 416 | 22 | 0 |
| 1770108060 | 7 | 723 | 417 | 20 | 0 |
| 1770106801 | 6 | 723 | 416 | 20 | 0 |
| 1770105447 | 4 | 720 | 416 | 21 | 0 |
| 1770104193 | 6 | 720 | 416 | 19 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)