This is the latest recevied telemetry packets stored in our database for station/object VK5RPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dig1h* | Eff1h* | Temp* |
---|---|---|---|---|---|
1719661828 | 13.8 Volt | 3 Pkt | 2 Pkt | 70 Pcnt | 13.5 C |
1719660026 | 13.8 Volt | 3 Pkt | 2 Pkt | 65 Pcnt | 13.5 C |
1719658225 | 13.8 Volt | 2 Pkt | 1 Pkt | 71 Pcnt | 13.5 C |
1719656423 | 13.8 Volt | 2 Pkt | 1 Pkt | 73 Pcnt | 13.5 C |
1719654621 | 13.8 Volt | 2 Pkt | 1 Pkt | 75 Pcnt | 13.5 C |
1719652820 | 13.8 Volt | 2 Pkt | 1 Pkt | 82 Pcnt | 13.5 C |
1719651018 | 13.8 Volt | 2 Pkt | 1 Pkt | 82 Pcnt | 13 C |
1719649216 | 13.8 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 13 C |
1719647414 | 13.8 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 13 C |
1719645613 | 13.8 Volt | 2 Pkt | 1 Pkt | 95 Pcnt | 13.5 C |
1719643811 | 13.8 Volt | 2 Pkt | 1 Pkt | 95 Pcnt | 14.5 C |
1719642009 | 13.8 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 15.5 C |
1719640207 | 13.8 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 15.5 C |
1719638406 | 13.8 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 15.5 C |
1719636604 | 13.8 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 15.5 C |
1719634802 | 13.88 Volt | 2 Pkt | 2 Pkt | 92 Pcnt | 15.5 C |
1719633001 | 13.88 Volt | 2 Pkt | 2 Pkt | 87 Pcnt | 15.5 C |
1719631199 | 13.88 Volt | 2 Pkt | 1 Pkt | 92 Pcnt | 15 C |
1719629397 | 13.8 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 15 C |
1719627595 | 13.88 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 15 C |
1719625794 | 13.8 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 15.5 C |
1719623992 | 13.88 Volt | 2 Pkt | 1 Pkt | 100 Pcnt | 15.5 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 1, 0
Dig1h: 0, 1, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -62
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)