APRS Track Direct

My position About ☰

reset

YM3KD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM3KD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732479757	11 Pkt	16 Pkt	3 Pkt	-17 dBm	13.58 V
1732478811	9 Pkt	13 Pkt	7 Pkt	-17 dBm	13.56 V
1732477869	6 Pkt	19 Pkt	6 Pkt	-17 dBm	13.56 V
1732476922	8 Pkt	18 Pkt	3 Pkt	-17 dBm	13.56 V
1732475975	15 Pkt	17 Pkt	5 Pkt	-17 dBm	13.56 V
1732475026	7 Pkt	13 Pkt	3 Pkt	-17 dBm	13.56 V
1732474087	17 Pkt	22 Pkt	3 Pkt	-17 dBm	13.56 V
1732473132	12 Pkt	24 Pkt	2 Pkt	-17 dBm	13.56 V
1732472177	7 Pkt	18 Pkt	2 Pkt	-18 dBm	13.56 V
1732471227	5 Pkt	18 Pkt	3 Pkt	-17 dBm	13.56 V
1732470281	5 Pkt	19 Pkt	9 Pkt	-17 dBm	13.56 V
1732469331	14 Pkt	19 Pkt	4 Pkt	-17 dBm	13.56 V
1732468378	16 Pkt	62 Pkt	4 Pkt	-17 dBm	13.56 V
1732467378	22 Pkt	28 Pkt	5 Pkt	-17 dBm	13.56 V
1732466413	22 Pkt	18 Pkt	5 Pkt	-17 dBm	13.56 V
1732465459	12 Pkt	14 Pkt	4 Pkt	-17 dBm	13.56 V
1732464513	24 Pkt	13 Pkt	1 Pkt	-17 dBm	13.56 V
1732463563	17 Pkt	15 Pkt	1 Pkt	-18 dBm	13.56 V
1732462617	18 Pkt	17 Pkt	9 Pkt	-18 dBm	13.56 V
1732461669	18 Pkt	21 Pkt	2 Pkt	-18 dBm	13.56 V
1732460717	24 Pkt	19 Pkt	5 Pkt	-18 dBm	13.56 V
1732459758	22 Pkt	21 Pkt	2 Pkt	-18 dBm	13.54 V
1732458806	29 Pkt	25 Pkt	3 Pkt	-18 dBm	13.56 V
1732457844	19 Pkt	26 Pkt	4 Pkt	-18 dBm	13.56 V
1732456884	9 Pkt	44 Pkt	4 Pkt	-18 dBm	13.56 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)