This is the latest recevied telemetry packets stored in our database for station/object VE3DLH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPM* | uSvh* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749328439 | 20 cpm | 0.16 uSv/h | 0 | 0 | 0 |
| 1749328139 | 24 cpm | 0.19 uSv/h | 0 | 0 | 0 |
| 1749327859 | 17 cpm | 0.13 uSv/h | 0 | 0 | 0 |
| 1749327599 | 23 cpm | 0.18 uSv/h | 0 | 0 | 0 |
| 1749327299 | 22 cpm | 0.17 uSv/h | 0 | 0 | 0 |
| 1749327048 | 28 cpm | 0.22 uSv/h | 0 | 0 | 0 |
| 1749326774 | 22 cpm | 0.17 uSv/h | 0 | 0 | 0 |
| 1749326497 | 16 cpm | 0.12 uSv/h | 0 | 0 | 0 |
| 1749325955 | 13 cpm | 0.1 uSv/h | 0 | 0 | 0 |
| 1749325699 | 13 cpm | 0.1 uSv/h | 0 | 0 | 0 |
| 1749325410 | 10 cpm | 0.08 uSv/h | 0 | 0 | 0 |
| 1749325142 | 13 cpm | 0.1 uSv/h | 0 | 0 | 0 |
| 1749324902 | 15 cpm | 0.12 uSv/h | 0 | 0 | 0 |
| 1749324649 | 23 cpm | 0.18 uSv/h | 0 | 0 | 0 |
| 1749324359 | 30 cpm | 0.24 uSv/h | 0 | 0 | 0 |
| 1749324069 | 13 cpm | 0.1 uSv/h | 0 | 0 | 0 |
| 1749323809 | 9 cpm | 0.07 uSv/h | 0 | 0 | 0 |
| 1749323549 | 20 cpm | 0.16 uSv/h | 0 | 0 | 0 |
| 1749323267 | 24 cpm | 0.19 uSv/h | 0 | 0 | 0 |
| 1749322979 | 25 cpm | 0.2 uSv/h | 0 | 0 | 0 |
| 1749322702 | 19 cpm | 0.15 uSv/h | 0 | 0 | 0 |
| 1749322437 | 24 cpm | 0.19 uSv/h | 0 | 0 | 0 |
| 1749322172 | 16 cpm | 0.12 uSv/h | 0 | 0 | 0 |
| 1749321899 | 14 cpm | 0.11 uSv/h | 0 | 0 | 0 |
| 1749321634 | 27 cpm | 0.21 uSv/h | 0 | 0 | 0 |
*Used Equation Coefficients:
CPM: 0, 1, 0
uSvh: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)