APRS Track Direct

My position About ☰

reset

TA1F-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1F-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732269471	41 Pkt	5 Pkt	17 Pkt	-49 dBm	0.74 V
1732269107	37 Pkt	1 Pkt	18 Pkt	-49 dBm	0.78 V
1732268743	6 Pkt	1 Pkt	5 Pkt	-49 dBm	0.84 V
1732268523	31 Pkt	24 Pkt	19 Pkt	-45 dBm	1.33 V
1732268158	40 Pkt	21 Pkt	11 Pkt	-46 dBm	0.76 V
1732267794	40 Pkt	15 Pkt	13 Pkt	-49 dBm	0.74 V
1732267429	47 Pkt	6 Pkt	9 Pkt	-45 dBm	0.84 V
1732267065	40 Pkt	4 Pkt	12 Pkt	-48 dBm	0.88 V
1732266701	10 Pkt	0 Pkt	1 Pkt	-50 dBm	0.8 V
1732266332	35 Pkt	1 Pkt	14 Pkt	-46 dBm	0.8 V
1732265968	13 Pkt	0 Pkt	4 Pkt	-47 dBm	0.82 V
1732265844	39 Pkt	8 Pkt	11 Pkt	-48 dBm	1.17 V
1732265479	45 Pkt	8 Pkt	13 Pkt	-46 dBm	1.56 V
1732265115	36 Pkt	12 Pkt	18 Pkt	-47 dBm	0.86 V
1732264751	39 Pkt	8 Pkt	13 Pkt	-47 dBm	0.86 V
1732264386	36 Pkt	5 Pkt	17 Pkt	-47 dBm	0.9 V
1732264021	40 Pkt	3 Pkt	20 Pkt	-51 dBm	0.8 V
1732263656	35 Pkt	4 Pkt	24 Pkt	-47 dBm	0.88 V
1732263292	8 Pkt	1 Pkt	8 Pkt	-47 dBm	0.8 V
1732262887	32 Pkt	3 Pkt	31 Pkt	-47 dBm	1.05 V
1732262523	33 Pkt	3 Pkt	30 Pkt	-50 dBm	0.74 V
1732262158	8 Pkt	0 Pkt	12 Pkt	-49 dBm	0.9 V
1732261794	40 Pkt	5 Pkt	32 Pkt	-47 dBm	0.82 V
1732261430	44 Pkt	8 Pkt	22 Pkt	-47 dBm	0.84 V
1732261065	37 Pkt	3 Pkt	19 Pkt	-47 dBm	0.78 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)