This is the latest recevied telemetry packets stored in our database for station/object TA2EE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1732285543 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 % |
| 1732284554 | 12 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1732283631 | 10 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 % |
| 1732282709 | 20 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 % |
| 1732281787 | 10 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1732280865 | 10 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 0 % |
| 1732279943 | 5 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 % |
| 1732279021 | 18 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 0 % |
| 1732278099 | 15 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 % |
| 1732277177 | 8 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1732276255 | 12 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 % |
| 1732275333 | 10 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1732274411 | 5 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 0 % |
| 1732273489 | 18 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1732272567 | 16 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 % |
| 1732271645 | 18 Pkt | 1 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1732270722 | 16 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 0 % |
| 1732269800 | 29 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 0 % |
| 1732268877 | 17 Pkt | 3 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1732267955 | 19 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 0 % |
| 1732267032 | 37 Pkt | 4 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1732266109 | 50 Pkt | 4 Pkt | 0 Pkt | -61 dBm | 0 % |
| 1732265185 | 47 Pkt | 3 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1732264260 | 42 Pkt | 1 Pkt | 0 Pkt | -63 dBm | 0 % |
| 1732263336 | 47 Pkt | 3 Pkt | 0 Pkt | -64 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)